On 16/05/2016 at 17:22:54 +0100, Colin King wrote :

From: Colin Ian King <redacted>

This patch fixes a RTC wakealarm issue, namely, the event fires during
hibernate and is not cleared from the list, causing hwclock to block.

The current enqueuing does not trigger an alarm if any expired timers
already exist on the timerqueue. This can occur when a RTC wake alarm
is used to wake a machine out of hibernate and the resumed state has
old expired timers that have not been removed from the timer queue.
This fix skips over any expired timers and triggers an alarm if there
are no pending timers on the timerqueue. Note that the skipped expired
timer will get repead later on, so there is no need to clean it up
immediately.

The issue can be reproduced by putting a machine into hibernate and
waking it with the RTC wakealarm.  Running the example RTC test program
from tools/testing/selftests/timers/rtctest.c after the hibernate will
block indefinitely.  With the fix, it no longer blocks after the
hibernate resume.

BugLink: http://bugs.launchpad.net/bugs/1333569

Signed-off-by: Colin Ian King <redacted>
---
 drivers/rtc/interface.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.