[rtc-linux] [PATCH v2 3/4] rtc: ds3234: use rtc-ds3232 core and support alarm
flat view
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: 2016-02-18 14:49:52
Subsystem:
real time clock (rtc) subsystem, the rest · Maintainers:
Alexandre Belloni, Linus Torvalds
Use rtc-ds3232 core module. This change enables to support alarm for rtc-ds3234. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <redacted> Cc: Alexandre Belloni <redacted> Cc: Dennis Aberilla <redacted> --- * no changes since v1 drivers/rtc/Kconfig | 1 + drivers/rtc/rtc-ds3234.c | 148 +++++++++++++++++++++++++---------------------- 2 files changed, 80 insertions(+), 69 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a489d89..cb27ace 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig@@ -733,6 +733,7 @@ config RTC_DRV_RS5C348 config RTC_DRV_DS3234 tristate "Maxim/Dallas DS3234" + select RTC_DRV_DS3232_CORE help If you say yes here you get support for the Maxim/Dallas DS3234 SPI RTC chip.
diff --git a/drivers/rtc/rtc-ds3234.c b/drivers/rtc/rtc-ds3234.c
index 570ab28..b681929 100644
--- a/drivers/rtc/rtc-ds3234.c
+++ b/drivers/rtc/rtc-ds3234.c@@ -19,20 +19,12 @@ #include <linux/spi/spi.h> #include <linux/bcd.h> -#define DS3234_REG_SECONDS 0x00 -#define DS3234_REG_MINUTES 0x01 -#define DS3234_REG_HOURS 0x02 -#define DS3234_REG_DAY 0x03 -#define DS3234_REG_DATE 0x04 -#define DS3234_REG_MONTH 0x05 -#define DS3234_REG_YEAR 0x06 -#define DS3234_REG_CENTURY (1 << 7) /* Bit 7 of the Month register */ +#include "rtc-ds3232.h" #define DS3234_REG_CONTROL 0x0E #define DS3234_REG_CONT_STAT 0x0F -static int ds3234_set_reg(struct device *dev, unsigned char address, - unsigned char data) +static int ds3234_write_byte(struct device *dev, u8 address, u8 data) { struct spi_device *spi = to_spi_device(dev); unsigned char buf[2];
@@ -44,79 +36,87 @@ static int ds3234_set_reg(struct device *dev, unsigned char address, return spi_write_then_read(spi, buf, 2, NULL, 0); } -static int ds3234_get_reg(struct device *dev, unsigned char address, - unsigned char *data) +static int ds3234_read_byte(struct device *dev, u8 address) { struct spi_device *spi = to_spi_device(dev); + u8 data; + int ret; - *data = address & 0x7f; + data = address & 0x7f; - return spi_write_then_read(spi, data, 1, data, 1); + ret = spi_write_then_read(spi, &data, 1, &data, 1); + if (ret) + return ret; + + return data; } -static int ds3234_read_time(struct device *dev, struct rtc_time *dt) +/* + * SPI multiple-byte burst transfer + */ +static int ds3234_write_block(struct device *dev, u8 address, const void *buf, + int len) { - int err; - unsigned char buf[8]; struct spi_device *spi = to_spi_device(dev); + struct spi_message message; + struct spi_transfer xfer = { + .len = len + 1, + }; + u8 *data; + int ret; + + data = kmalloc(xfer.len, GFP_KERNEL); + if (!data) + return -ENOMEM; - buf[0] = 0x00; /* Start address */ + data[0] = address | 0x80; + memcpy(data + 1, buf, len); - err = spi_write_then_read(spi, buf, 1, buf, 8); - if (err != 0) - return err; + xfer.tx_buf = data; + spi_message_init(&message); + spi_message_add_tail(&xfer, &message); - /* Seconds, Minutes, Hours, Day, Date, Month, Year */ - dt->tm_sec = bcd2bin(buf[0]); - dt->tm_min = bcd2bin(buf[1]); - dt->tm_hour = bcd2bin(buf[2] & 0x3f); - dt->tm_wday = bcd2bin(buf[3]) - 1; /* 0 = Sun */ - dt->tm_mday = bcd2bin(buf[4]); - dt->tm_mon = bcd2bin(buf[5] & 0x1f) - 1; /* 0 = Jan */ - dt->tm_year = bcd2bin(buf[6] & 0xff) + 100; /* Assume 20YY */ + ret = spi_sync(spi, &message); + kfree(data); - return rtc_valid_tm(dt); + return ret; } -static int ds3234_set_time(struct device *dev, struct rtc_time *dt) +/* + * SPI multiple-byte burst transfer + */ +static int ds3234_read_block(struct device *dev, u8 addr, void *buf, int len) { - ds3234_set_reg(dev, DS3234_REG_SECONDS, bin2bcd(dt->tm_sec)); - ds3234_set_reg(dev, DS3234_REG_MINUTES, bin2bcd(dt->tm_min)); - ds3234_set_reg(dev, DS3234_REG_HOURS, bin2bcd(dt->tm_hour) & 0x3f); - - /* 0 = Sun */ - ds3234_set_reg(dev, DS3234_REG_DAY, bin2bcd(dt->tm_wday + 1)); - ds3234_set_reg(dev, DS3234_REG_DATE, bin2bcd(dt->tm_mday)); - - /* 0 = Jan */ - ds3234_set_reg(dev, DS3234_REG_MONTH, bin2bcd(dt->tm_mon + 1)); + struct spi_device *spi = to_spi_device(dev); - /* Assume 20YY although we just want to make sure not to go negative. */ - if (dt->tm_year > 100) - dt->tm_year -= 100; + return spi_write_then_read(spi, &addr, 1, buf, len); +} - ds3234_set_reg(dev, DS3234_REG_YEAR, bin2bcd(dt->tm_year)); +static int ds3234_irq(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); - return 0; + return spi->irq; } -static const struct rtc_class_ops ds3234_rtc_ops = { - .read_time = ds3234_read_time, - .set_time = ds3234_set_time, +static const struct ds3232_ops ds3234_ops = { + .read_byte = ds3234_read_byte, + .write_byte = ds3234_write_byte, + .read_block = ds3234_read_block, + .write_block = ds3234_write_block, + .irq = ds3234_irq, }; static int ds3234_probe(struct spi_device *spi) { - struct rtc_device *rtc; - unsigned char tmp; int res; spi->mode = SPI_MODE_3; spi->bits_per_word = 8; spi_setup(spi); - res = ds3234_get_reg(&spi->dev, DS3234_REG_SECONDS, &tmp); - if (res != 0) + res = ds3234_read_byte(&spi->dev, 0); + if (res < 0) return res; /* Control settings
@@ -133,27 +133,37 @@ static int ds3234_probe(struct spi_device *spi) * * 1 0 0 0 1 0 0 0 */ - ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp); - ds3234_set_reg(&spi->dev, DS3234_REG_CONTROL, tmp & 0x1c); + res = ds3234_read_byte(&spi->dev, DS3234_REG_CONTROL); + if (res < 0) + return res; + res = ds3234_write_byte(&spi->dev, DS3234_REG_CONTROL, res & 0x1c); + if (res) + return res; - ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp); - ds3234_set_reg(&spi->dev, DS3234_REG_CONT_STAT, tmp & 0x88); + res = ds3234_read_byte(&spi->dev, DS3234_REG_CONT_STAT); + if (res < 0) + return res; + res = ds3234_write_byte(&spi->dev, DS3234_REG_CONT_STAT, res & 0x88); + if (res) + return res; /* Print our settings */ - ds3234_get_reg(&spi->dev, DS3234_REG_CONTROL, &tmp); - dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp); - - ds3234_get_reg(&spi->dev, DS3234_REG_CONT_STAT, &tmp); - dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp); + res = ds3234_read_byte(&spi->dev, DS3234_REG_CONTROL); + if (res < 0) + return res; + dev_info(&spi->dev, "Control Reg: 0x%02x\n", res); - rtc = devm_rtc_device_register(&spi->dev, "ds3234", - &ds3234_rtc_ops, THIS_MODULE); - if (IS_ERR(rtc)) - return PTR_ERR(rtc); + res = ds3234_read_byte(&spi->dev, DS3234_REG_CONT_STAT); + if (res < 0) + return res; + dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", res); - spi_set_drvdata(spi, rtc); + return ds3232_probe(&spi->dev, &ds3234_ops, "ds3234"); +} - return 0; +static int ds3234_remove(struct spi_device *spi) +{ + return ds3232_remove(&spi->dev); } static struct spi_driver ds3234_driver = {
@@ -161,8 +171,8 @@ static struct spi_driver ds3234_driver = { .name = "ds3234", }, .probe = ds3234_probe, + .remove = ds3234_remove, }; - module_spi_driver(ds3234_driver); MODULE_DESCRIPTION("DS3234 SPI RTC driver");
--
2.5.0
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.