On 15.02.2016 23:11, Javier Martinez Canillas wrote:

The S3C binding doc says that the RTC and RTC source clocks are required
but the S3C driver supports different HW IP and only the s3c6410 needs a
source clock.

Fix the binding explaining that the source clock is only needed for the
s3c6410-rtc compatible controller.

Reported-by: Krzysztof Kozlowski <redacted>
Signed-off-by: Javier Martinez Canillas <redacted>
Acked-by: Alexandre Belloni <redacted>

---
Hello,

This patch depends on a previous one that was picked by Rob Herring so
this one has to go through his tree again and not through the RTC tree
to avoid conflicts.

Best regards,
Javier

Changes in v2:
- Remove the mention to a commit sha-1 that's not in mainline (Alexandre).
- Fix typo in commit message (Alexandre).
- Add Alexandre's Acked-by tag.

 Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Reviewed-by: Krzysztof Kozlowski <redacted>

Best regards,
Krzysztof

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.