[rtc-linux] [PATCH V6 3/6] rtc: max77686: use rtc regmap to access RTC registers
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: 2016-02-09 12:41:39
Also in:
lkml
Subsystem:
maxim pmic and muic drivers for exynos based boards, real time clock (rtc) subsystem, the rest · Maintainers:
Chanwoo Choi, Krzysztof Kozlowski, Alexandre Belloni, Linus Torvalds
rtc_regmap should be used to access all RTC registers instead of parent regmap regardless of what chip or property have it. This makes the register access uniform and extendible for other chips. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: Krzysztof Kozlowski <redacted> CC: Javier Martinez Canillas <redacted> Tested-by: Krzysztof Kozlowski <redacted> Reviewed-by: Krzysztof Kozlowski <redacted> Tested-by: Javier Martinez Canillas <redacted> Reviewed-by: Javier Martinez Canillas <redacted> --- Changes from V1: None, added reviewed/tested by. Changes from V2: None Changes from V3: None, become 3rd on series. Changes from V5: None drivers/rtc/rtc-max77686.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 253cf12..11f74ed 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c@@ -370,7 +370,7 @@ static int max77686_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) goto out; } - ret = regmap_read(info->max77686->regmap, + ret = regmap_read(info->max77686->rtc_regmap, map[REG_RTC_AE1], &val); if (ret < 0) { dev_err(info->dev,
@@ -426,7 +426,8 @@ static int max77686_rtc_stop_alarm(struct max77686_rtc_info *info) goto out; } - ret = regmap_write(info->max77686->regmap, map[REG_RTC_AE1], 0); + ret = regmap_write(info->max77686->rtc_regmap, + map[REG_RTC_AE1], 0); } else { ret = regmap_bulk_read(info->max77686->rtc_regmap, map[REG_ALARM1_SEC], data,
@@ -471,7 +472,7 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info) goto out; if (info->drv_data->alarm_enable_reg) { - ret = regmap_write(info->max77686->regmap, map[REG_RTC_AE1], + ret = regmap_write(info->max77686->rtc_regmap, map[REG_RTC_AE1], MAX77802_ALARM_ENABLE_VALUE); } else { ret = regmap_bulk_read(info->max77686->rtc_regmap,
--
2.1.4
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.