[rtc-linux] [PATCH V7 5/8] gpio: add DT binding doc for gpio of PMIC max77620/max20024
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: 2016-01-30 16:50:46
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
gpio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Maxim Semiconductor's PMIC MAX77620/MAX20024 has 8 GPIO pins which act as GPIO as well as special function mode. Add DT binding document to support these pins in GPIO mode via GPIO framework. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/gpio/gpio-max77620.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
new file mode 100644
index 0000000..410e716
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt@@ -0,0 +1,25 @@ +GPIO driver for MAX77620 Power management IC from Maxim Semiconductor. + +Device has 8 GPIO pins which can be configured as GPIO as well as the +special IO functions. + +Required properties: +------------------- +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +For more details, please refer generic GPIO DT binding document +<devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- +#include <dt-bindings/mfd/max77620.h> +... +max77620@3c { + compatible = "maxim,max77620"; + + gpio-controller; + #gpio-cells = <2>; +};
--
2.1.4
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.