[rtc-linux] [PATCH v4 03/10] rtc: max77686: Use usleep_range() instead of msleep()

Documentation/timers/timers-howto.txt suggest to use usleep_range()
instead of msleep() for small msec (1ms - 20ms) since msleep() will
often sleep for 20ms for any value in that range.

This is fine in this case since 16ms is the _minimum_ delay required
by max77686 for an RTC update but by using usleep_range() instead of
msleep(), the driver can support other RTC IP blocks with a shorter
minimum delay (i.e: in the range of usecs instead of msecs).

Signed-off-by: Javier Martinez Canillas <redacted>
Reviewed-by: Krzysztof Kozlowski <redacted>
Tested-by: Krzysztof Kozlowski <redacted>
Reviewed-by: Andi Shyti <redacted>

---

Changes in v4:
- Add Andi Shyti's Reviewed-by to patch #3.

Changes in v3:
- Add Krzysztof Kozlowski's Tested-by tag to patch #3.
- Add Laxman Dewangan's Acked-by tag to patch #3.

Changes in v2:
- Add Krzysztof Kozlowski's Reviewed-by tag to patch #3.
- Fix typo error in changelog. Suggested by Krzysztof Kozlowski.

 drivers/rtc/rtc-max77686.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d84a50c9f7f7..025a17a95da3 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c

@@ -41,7 +41,7 @@
 #define ALARM_ENABLE_SHIFT		7
 #define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
 
-#define MAX77686_RTC_UPDATE_DELAY	16
+#define MAX77686_RTC_UPDATE_DELAY	16000
 
 enum {
 	RTC_SEC = 0,

@@ -130,7 +130,8 @@ static int max77686_rtc_update(struct max77686_rtc_info *info,
 				__func__, ret, data);
 	else {
 		/* Minimum 16ms delay required before RTC update. */
-		msleep(MAX77686_RTC_UPDATE_DELAY);
+		usleep_range(MAX77686_RTC_UPDATE_DELAY,
+			     MAX77686_RTC_UPDATE_DELAY * 2);
 	}
 
 	return ret;

-- 
2.5.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.