[rtc-linux] Re: [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: 2015-12-08 10:29:47
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2015-12-10 · Re: [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding · Steffen Trumtrar <hidden>
- 2015-12-08 · Re: [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding · Philipp Zabel <hidden>
- 2015-12-08 · [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding · Steffen Trumtrar <hidden>
Am Dienstag, den 08.12.2015, 10:54 +0100 schrieb Steffen Trumtrar:
Add the binding documentation for the Epson RX6110 RTC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Steffen Trumtrar <redacted>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> although I'd like a small change to be made below:
quoted hunk
--- Changes since v2: - removed the size field in i2c binding .../devicetree/bindings/rtc/epson,rx6110.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txtdiff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt new file mode 100644 index 000000000000..71353542a59d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt@@ -0,0 +1,39 @@ +Epson RX6110 Real Time Clock +============================ + +The Epson RX6110 can be used with SPI or I2C busses. The kind of +bus depends on the SPISEL pin and can not be configured via software. + +I2C mode +-------- + +Required properties: + - compatible: should be: "epson,rx6110" + - reg : offset of the register set of the device
That should be the I2C address of the device: git grep "reg.*I2C address" Documentation/ regards Philipp -- -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.