On Thu, Jun 30, 2016 at 12:54:14PM -0500, Corey Minyard wrote:

It won't crash.  If you disable PREEMPT_RT on the 3.10-rt kernel it won't
crash (which I have tested).  With PREEMPT_RT, the kernel creates a
separate thread that is woken on mce notifications.  The trouble is
that the interrupts are initialized before the thread is created.

Hmmm.

Ok, so I don't have any idea what RT does but from looking at your splat:

[    0.164153] Call Trace:
[    0.164165]  <IRQ>
[    0.164185]  [<ffffffff8106dcd8>] try_to_wake_up+0x28/0x320
[    0.164188]  [<ffffffff8106dfe0>] wake_up_process+0x10/0x20
[    0.164207]  [<ffffffff8101c548>] mce_notify_irq+0x28/0x30
[    0.164210]  [<ffffffff8101df35>] intel_threshold_interrupt+0xb5/0xd0
[    0.164213]  [<ffffffff8101e88c>] smp_threshold_interrupt+0x1c/0x40
[    0.164221]  [<ffffffff816f9b5a>] threshold_interrupt+0x6a/0x70
[    0.164223]  <EOI>
[    0.164226]  [<ffffffff8101dda7>] ? cmci_recheck+0x67/0x70
[    0.164241]  [<ffffffff816e9777>] setup_local_APIC+0x276/0x283
[    0.164259]  [<ffffffff81caf010>] native_smp_prepare_cpus+0x379/0x43b
[    0.164266]  [<ffffffff81ca3e4f>] kernel_init_freeable+0xd7/0x21a
[    0.164270]  [<ffffffff816df1f0>] ? rest_init+0x90/0x90
[    0.164272]  [<ffffffff816df1f9>] kernel_init+0x9/0x180
[    0.164275]  [<ffffffff816f8dc8>] ret_from_fork+0x58/0x90
[    0.164277]  [<ffffffff816df1f0>] ? rest_init+0x90/0x90
[    0.164295] Code: e7 ff ff 48 8b 7d 08 e8 02 1a 95 ff 5d c3 55 48 89 e5 41
54 53 48 89 fb 9c 41 5c fa bf 01 00 00 00 e8 a8 38 00 00 ba 00 01 00 00 <f0>
66 0f c1 13 0f b6 ce 38 d1 74 10 0f 1f 80 00 00 00 00 f3 90
[    0.164298] RIP  [<ffffffff816f344d>] _raw_spin_lock_irqsave+0x1d/0x50
[    0.164298]  RSP <ffff88017fa03f00>
[    0.164299] CR2: 0000000000000600
[    0.656225] ---[ end trace 0000000000000001 ]---
[    0.656233] Kernel panic - not syncing: Fatal exception in interrupt

we're 0.16 seconds within the boot and we're just initializing the local
APIC and the moment that happens, we get a thresholding APIC interrupt.

So how can interrupts be initialized before that?

I'm genuinely asking because I can't imagine how CMCI can get initialized
*after* the local APIC init.

Because, we do init CMCI in identify_cpu()->mcheck_cpu_init() and that
happens earlier than your splat. You can even see where it happens in
dmesg:

[    0.049270] mce: CPU supports 22 MCE banks
[    0.049383] CPU0: Thermal monitoring enabled (TM1)

First line is __mcheck_cpu_cap_init(), second is intel_init_thermal().

The CMCI initialization is done right after it in

void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
        intel_init_thermal(c);
        intel_init_cmci();


but wait!, this is the upstream kernel. Where can I look at 3.10-rt
sources?

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.