On 8 October 2011 23:45, Juergen Beisert [off-list ref] wrote:

Hi Thomas,

Thomas Abraham wrote:

quoted

On 8 October 2011 16:56, Juergen Beisert [off-list ref] wrote:

quoted

Thomas Gleixner wrote:

quoted

I'm pleased to announce the 3.0.6-rt17 release.

I have no idea where to search, but when I'm using the 3.0.6-rt17 on my
Samsung S3C6410 ARM based system, the UART (serial console) does not work
as expected. Typing only one char at a time is okay. Typing two chars
immediately makes the system using 100 % CPU load and takes about 2
seconds to respond. It seems the interrupt handling is broken in the UART
driver, but I don't know how to fix it.

This with a simple cursor up (one char to get the last command) and a
small pause to the next "ENTER" char:

root@mini6410:~ cat /proc/interrupts | grep 18:
 18:    5739107  s3c-uart  s3c6400-uart

Same again:

root@mini6410:~ cat /proc/interrupts | grep 18:
 18:    5739113  s3c-uart  s3c6400-uart

6 interrupts seems reasonable.

Now with cursor up and SPACE immediately, then a pause for ENTER:

root@mini6410:~ cat /proc/interrupts | grep 18:
 18:    5923815  s3c-uart  s3c6400-uart

184702 interrupts looks strange.

Just curious, do you have the following two commits?

serial: samsung: Add unified interrupt handler for s3c64xx and later SoC's
ARM: SAMSUNG: Remove uart irq handling from platform code

Are they part of the current 3.0.6 vanilla kernel? I'm only using the vanilla
3.0.6 with rt17 on my target.

No. I don't think they are part of 3.0.6 kernel. I am not sure of the
issue you have with serial console, but if you do not have these
patches already applied, you could try with them.

Thanks,
Thomas.
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html