Re: [PATCH v2 1/2] devicetree: i2c-hid: Add Wacom digitizer + regulator support
From: Brian Norris <hidden>
Date: 2016-12-12 18:34:30
Also in:
linux-devicetree, linux-input, lkml
Hi all, On Mon, Dec 12, 2016 at 08:47:06AM -0600, Rob Herring wrote: [Snip Benjamin's proposal; I agree we don't really want a multi-level DT layout purely for making the driver look a little nicer (I'm not sure this would really be nicer anyway). And I think, as Rob notes here, our disagreement is smaller than appears. But I might be wrong.]
Anyway, we're only debating this:
OK, so I think we might have a consensus of sorts? I'll describe it here, in case I'm wrong. Otherwise, I'll send another rev.
i2c-hid-dev@2c {
compatible = "wacom,w9013", "hid-over-i2c";I plan to document the above, but not treat "wacom,w9013" specially in the driver, apart from possibly listing it in the driver of_match_table. This was mentioned by Dmitry earlier, and I didn't see any objection. (Note that there are problems with module autoload when using multiple compatible strings like above. May not be supremely relevant to the documentation, but it *is* practically important.)
reg = <0x2c>;
hid-descr-addr = <0x0020>;
interrupt-parent = <&gpx3>;
interrupts = <3 2>;
vdd-supply = <sth>;Document and support 'vdd-supply', optionally.
init-delay-ms = <100>;
Per Rob's mention below, support this as 'post-power-on-delay-ms', optionally. We can use either of these properties on any device, with the intention that if there are future needs for divergent bindings, the aforementioned compatible property can help us differentiate.
};
vs.
i2c-hid-dev@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
hid-descr-addr = <0x0020>;
interrupt-parent = <&gpx3>;
interrupts = <3 2>;
vdd-supply = <sth>;
init-delay-ms = <100>;
};
My only other nit is use "post-power-on-delay-ms" which is already a
defined property name rather than "init-delay-ms".Any objections? Speak now or forever [1] hold your peace. Brian [1] Who am I kidding? There's always room for more paint on the bikeshed. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html