Re: [PATCH 5/6] riscv: microchip: mpfs: drop duplicated MMC/SDHC node
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-08-24 15:38:00
Also in:
linux-devicetree, linux-mmc, lkml
Hi Krzysztof, On Thu, Aug 19, 2021 at 5:45 PM Krzysztof Kozlowski [off-list ref] wrote:
Devicetree source is a description of hardware and hardware has only one block @20008000 which can be configured either as eMMC or SDHC. Having two node for different modes is an obscure, unusual and confusing way to configure it. Instead the board file is supposed to customize the block to its needs, e.g. to SDHC mode. This fixes dtbs_check warning: arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dt.yaml: sdhc@20008000: $nodename:0: 'sdhc@20008000' does not match '^mmc(@.*)?$' Signed-off-by: Krzysztof Kozlowski <redacted>
Thanks for your patch!
quoted hunk ↗ jump to hunk
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts@@ -43,8 +43,16 @@ &serial3 { status = "okay"; }; -&sdcard { +&mmc { status = "okay"; + + disable-wp; + cap-sd-highspeed; + card-detect-delay = <200>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; }; &emac0 {diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index cb54da0cc3c4..c4ccd7e4d3eb 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi@@ -262,25 +262,7 @@ serial3: serial@20104000 { status = "disabled"; }; - emmc: mmc@20008000 { - compatible = "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88 89>;
Note that the other node has only a single interrupt. Which one is correct?
quoted hunk ↗ jump to hunk
- pinctrl-names = "default"; - clocks = <&clkcfg 6>; - bus-width = <4>; - cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <200000000>; - non-removable; - no-sd; - no-sdio; - voltage-ranges = <3300 3300>; - status = "disabled"; - }; - - sdcard: sdhc@20008000 { + mmc: mmc@20008000 { compatible = "cdns,sd4hc"; reg = <0x0 0x20008000 0x0 0x1000>; interrupt-parent = <&plic>;@@ -288,13 +270,6 @@ sdcard: sdhc@20008000 { pinctrl-names = "default"; clocks = <&clkcfg 6>; bus-width = <4>;
I think bus-width should be moved to the board .dts, too.
- disable-wp;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
max-frequency = <200000000>;
status = "disabled";
};
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv