On Tue, Nov 23, 2021 at 10:24:02PM +0800, Wenpeng Liang wrote:

From: Yangyang Li <redacted>

When hns_roce_v2_destroy_qp() is called, the brief calling process of the
driver is as follows:

......
hns_roce_v2_destroy_qp
hns_roce_v2_qp_modify
	   hns_roce_cmd_mbox
hns_roce_qp_destroy

If hns_roce_cmd_mbox() detects that the hardware is being reset during
the execution of the hns_roce_cmd_mbox(), the driver will not be able
to get the return value from the hardware (the firmware cannot respond
to the driver's mailbox during the hardware reset phase). The driver
needs to wait for the hardware reset to complete before continuing to
execute hns_roce_qp_destroy(), otherwise it may happen that the driver
releases the resources but the hardware is still accessing. In order to
fix this problem, HNS RoCE needs to add a piece of code to wait for the
hardware reset to complete.

The original interface get_hw_reset_stat() is the instantaneous state
of the hardware reset, which cannot accurately reflect whether the
hardware reset is completed, so it needs to be replaced with the
ae_dev_reset_cnt interface.

The sign that the hardware reset is complete is that the return value
of the ae_dev_reset_cnt interface is greater than the original value
reset_cnt recorded by the driver.

Fixes: 6a04aed6afae ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: Yangyang Li <redacted>
Signed-off-by: Wenpeng Liang <redacted>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

Applied to for-rc, thanks

Jason