Re: [PATCH] switchdev: add Kconfig dependencies for bridge

On Mon, Aug 2, 2021 at 6:23 PM Simon Horman [off-list ref] wrote:

On Mon, Aug 02, 2021 at 04:47:28PM +0200, Arnd Bergmann wrote:

quoted

---
This version seems to pass my randconfig builds for the moment,
but that doesn't mean it's correct either. Please have a closer
look before this gets applied.

Thank you for taking a look, it seems I have done a particularly bad
job rebasing
the patch on top of the previous fix, leaving only the wrong bits ;-)

quoted

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index e1a5a79e27c7..3a752e57c1e5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -12,6 +12,7 @@ config MLX5_CORE
      depends on MLXFW || !MLXFW
      depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
      depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
+     depends on NET_MAY_USE_SWITCHDEV
      help
        Core driver for low level functionality of the ConnectX-4 and
        Connect-IB cards by Mellanox Technologies.

MLX5_CORE does not appear to cover code that calls
switchdev_bridge_port_offload.

Ah right, I did get a link failure with my test build, but it was an
unrelated one:

ld: drivers/net/ethernet/mellanox/mlx5/core/esw/sample.o: in function
`mlx5_esw_sample_skb':
sample.c:(.text+0x5b4): undefined reference to `psample_sample_packet'

I think that one needs

--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -90,6 +90,7 @@ config MLX5_BRIDGE
 config MLX5_CLS_ACT
        bool "MLX5 TC classifier action support"
        depends on MLX5_ESWITCH && NET_CLS_ACT
+       depends on PSAMPLE=y || PSAMPLE=MLX5_CORE
        default y
        help
          mlx5 ConnectX offloads support for TC classifier action (NET_CLS_ACT),

but this is unrelated and I have not tested that.

quoted

diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index 12871c8dc7c1..dee3925bdaea 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -5,6 +5,7 @@

 config MLXSW_CORE
      tristate "Mellanox Technologies Switch ASICs support"
+     depends on NET_MAY_USE_SWITCHDEV
      select NET_DEVLINK
      select MLXFW
      help

I think it is MLXSW_SPECTRUM rather than MLXSW_CORE
that controls compilation of spectrum_switchdev.c
which calls switchdev_bridge_port_offload.

But MLXSW_SPECTRUM seems to already depend on BRIDGE || BRIDGE=n

Ok.

quoted

diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
index b82758d5beed..a298d19e8383 100644
--- a/drivers/net/ethernet/netronome/Kconfig
+++ b/drivers/net/ethernet/netronome/Kconfig

@@ -21,6 +21,7 @@ config NFP
      depends on PCI && PCI_MSI
      depends on VXLAN || VXLAN=n
      depends on TLS && TLS_DEVICE || TLS_DEVICE=n
+     depends on NET_MAY_USE_SWITCHDEV
      select NET_DEVLINK
      select CRC32
      help

This seems wrong, the NFP driver doesn't call
switchdev_bridge_port_offload()

Ah right, I actually noticed that earlier and then forgot to remove that hunk.

Also: is this actually intended or should the driver call
switchdev_bridge_port_offload() like the other switchdev drivers do?

quoted

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 07192613256e..a73c6c236b25 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig

@@ -93,6 +93,7 @@ config TI_CPTS
 config TI_K3_AM65_CPSW_NUSS
      tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
      depends on OF && TI_K3_UDMA_GLUE_LAYER
+     depends on NET_MAY_USE_SWITCHDEV
      select NET_DEVLINK
      select TI_DAVINCI_MDIO
      imply PHY_TI_GMII_SEL

I believe this has already been addressed by the following patch in net

b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module")

I think the fix was wrong here, and that hunk should be reverted.
The dependency was added to a bool option, where it does not have
the intended effect.

I think this is the only remaining thing needed from my patch, so
the NET_MAY_USE_SWITCHDEV option is not needed either,
and it could be written as:

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 07192613256e..e49006a96d49 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig

@@ -93,6 +93,7 @@ config TI_CPTS
 config TI_K3_AM65_CPSW_NUSS
        tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
        depends on OF && TI_K3_UDMA_GLUE_LAYER
+       depends on (BRIDGE && NET_SWITCHDEV) || BRIDGE=n || NET_SWITCHDEV=n
        select NET_DEVLINK
        select TI_DAVINCI_MDIO
        imply PHY_TI_GMII_SEL

@@ -110,7 +111,6 @@ config TI_K3_AM65_CPSW_NUSS
 config TI_K3_AM65_CPSW_SWITCHDEV
        bool "TI K3 AM654x/J721E CPSW Switch mode support"
        depends on TI_K3_AM65_CPSW_NUSS
-       depends on BRIDGE || BRIDGE=n
        depends on NET_SWITCHDEV
        help
         This enables switchdev support for TI K3 CPSWxG Ethernet

If this looks correct to you, I can submit it as a standalone patch.

      Arnd