-----Original Message-----
From: frank zago [mailto:fzago-klaOcWyJdxkshyMvu7JE4pqQE7yCjDx5@public.gmane.org]

On 02/25/2011 10:04 AM, Bharath Ramesh wrote:

quoted

quoted

-----Original Message-----
From: frank zago [mailto:fzago-klaOcWyJdxkshyMvu7JE4pqQE7yCjDx5@public.gmane.org]

On 02/25/2011 01:30 AM, Bharath Ramesh wrote:

quoted

Hi,
	I am trying to use IB atomic operations, specifically fetch and

add.

quoted

I tried a small example but I am unable to get it to work. The WC

status is

quoted

IBV_WC_REM_INV_REQ_ERR. My sample code is as follows:

Did you register your memory with IBV_ACCESS_REMOTE_ATOMIC ?

I have registered both the remote and local data with
IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_ATOMIC |

IBV_ACCESS_REMOTE_READ |

quoted

IBV_ACCESS_REMOTE_WRITE

Do you create your QPs with RDMA CM or do you transition them by hand ?
In the later case there is a couple flags to set.

I transition them by hand, my QP creation is done as follows:

memset (&init_attr, 0, sizeof (struct ibv_qp_init_attr));
init_attr.recv_cq = ib_cq;
init_attr.send_cq = ib_cq;
init_attr.cap.max_recv_wr = IB_MAX_WR;
init_attr.cap.max_send_wr = IB_MAX_WR;
init_attr.cap.max_recv_sge = IB_MAX_SGE;
init_attr.cap.max_send_sge = IB_MAX_SGE;
init_attr.qp_type = IBV_QPT_RC;
qp = ibv_create_qp (ib_pd, &init_attr);
if (qp == NULL) {
	// QP creation error.
}

I transition the QP as follows:

// Transition QP to INIT state.
attr.qp_state = IBV_QPS_INIT;
attr.pkey_index = 0;
attr.port_num = IB_PORT;
attr.qp_access_flags = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_ATOMIC |
IBV_ACCESS_REMOTE_READ
	| IBV_ACCESS_REMOTE_WRITE;
if (ibv_modify_qp (qp, &attr, IBV_QP_STATE | IBV_QP_PKEY_INDEX |
		IBV_QP_PORT | IBV_QP_ACCESS_FLAGS) != 0) {
	// QP modify error.
}

memset (&attr, 0, sizeof (struct ibv_qp_attr));
attr.qp_state = IBV_QPS_RTR;
attr.path_mtu = ib_mtu;
attr.dest_qp_num = qpn;
attr.rq_psn = 0;
attr.max_dest_rd_atomic = IB_MAX_RD_ATOMIC;
attr.min_rnr_timer = IB_RNR_TIMER;
attr.ah_attr.is_global = 0;
attr.ah_attr.dlid = lid;
attr.ah_attr.sl = 0;
attr.ah_attr.src_path_bits = 0;
attr.ah_attr.port_num = IB_PORT;
if (ibv_modify_qp (qp, &attr, IBV_QP_STATE | IBV_QP_AV | IBV_QP_PATH_MTU |
IBV_QP_DEST_QPN |
		IBV_QP_RQ_PSN | IBV_QP_MAX_DEST_RD_ATOMIC |
IBV_QP_MIN_RNR_TIMER) != 0) {
	// QP modify error.
}

// Transition the QP to RTS.
attr.timeout = IB_TIMEOUT;
attr.retry_cnt = IB_RETRY_CNT;
attr.rnr_retry = IB_RNR_RETRY;
attr.qp_state = IBV_QPS_RTS;
attr.sq_psn = 0;
attr.max_rd_atomic = IB_MAX_RD_ATOMIC;
if (ibv_modify_qp (qp, &attr, IBV_QP_STATE | IBV_QP_SQ_PSN |
IBV_QP_MAX_QP_RD_ATOMIC |
		IBV_QP_RETRY_CNT | IBV_QP_RNR_RETRY | IBV_QP_TIMEOUT) != 0)
{
	// QP modify error.
}

Regards,

Bharath