@@ -8,28 +8,6 @@ config BINARY_PRINTF
 
 menu "Library routines"
 
-config RAID6_PQ
-	tristate
-
-config RAID6_PQ_KUNIT_TEST
-	tristate "KUnit tests for raid6 PQ functions" if !KUNIT_ALL_TESTS
-	depends on KUNIT
-	depends on RAID6_PQ
-	default KUNIT_ALL_TESTS
-	help
-	  Unit tests for the RAID6 PQ library functions.
-
-	  This is intended to help people writing architecture-specific
-	  optimized versions.  If unsure, say N.
-
-config RAID6_PQ_BENCHMARK
-	bool "Automatically choose fastest RAID6 PQ functions"
-	depends on RAID6_PQ
-	default y
-	help
-	  Benchmark all available RAID6 PQ functions on init and choose the
-	  fastest one.
-
 config LINEAR_RANGES
 	tristate
 

@@ -166,7 +166,6 @@ obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
 obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
 obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
 obj-$(CONFIG_XZ_DEC) += xz/
-obj-$(CONFIG_RAID6_PQ) += raid6/
 
 lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
 lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o

@@ -28,3 +28,25 @@ config XOR_KUNIT_TEST
 
 	  This is intended to help people writing architecture-specific
 	  optimized versions.  If unsure, say N.
+
+config RAID6_PQ
+	tristate
+
+config RAID6_PQ_KUNIT_TEST
+	tristate "KUnit tests for raid6 PQ functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	depends on RAID6_PQ
+	default KUNIT_ALL_TESTS
+	help
+	  Unit tests for the RAID6 PQ library functions.
+
+	  This is intended to help people writing architecture-specific
+	  optimized versions.  If unsure, say N.
+
+config RAID6_PQ_BENCHMARK
+	bool "Automatically choose fastest RAID6 PQ functions"
+	depends on RAID6_PQ
+	default y
+	help
+	  Benchmark all available RAID6 PQ functions on init and choose the
+	  fastest one.

@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-y				+= xor/
+obj-y				+= xor/ raid6/

@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_RAID6_PQ)		+= raid6_pq.o tests/
+
+raid6_pq-y			+= algos.o tables.o
+
+# generic integer generation and recovery implementation
+raid6_pq-y			+= int1.o int2.o int4.o int8.o
+raid6_pq-y			+= recov.o
+
+# architecture-specific generation and recovery implementations:
+raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += arm/neon.o \
+				   arm/neon1.o \
+				   arm/neon2.o \
+				   arm/neon4.o \
+				   arm/neon8.o \
+				   arm/recov_neon.o \
+				   arm/recov_neon_inner.o
+raid6_pq-$(CONFIG_LOONGARCH)	+= loongarch/loongarch_simd.o \
+				   loongarch/recov_loongarch_simd.o
+raid6_pq-$(CONFIG_ALTIVEC)	+= powerpc/altivec1.o \
+				   powerpc/altivec2.o \
+				   powerpc/altivec4.o \
+				   powerpc/altivec8.o \
+				   powerpc/vpermxor1.o \
+				   powerpc/vpermxor2.o \
+				   powerpc/vpermxor4.o \
+				   powerpc/vpermxor8.o
+raid6_pq-$(CONFIG_RISCV_ISA_V)	+= riscv/rvv.o \
+				   riscv/recov_rvv.o
+raid6_pq-$(CONFIG_S390)		+= s390/s390vx8.o \
+				   s390/recov_s390xc.o
+ifeq ($(CONFIG_X86),y)
+raid6_pq-$(CONFIG_X86_32)	+= x86/mmx.o \
+				   x86/sse1.o
+endif
+raid6_pq-$(CONFIG_X86)		+= x86/sse2.o \
+				   x86/avx2.o \
+				   x86/avx512.o \
+				   x86/recov_ssse3.o \
+				   x86/recov_avx2.o \
+				   x86/recov_avx512.o
+
+hostprogs	+= mktables
+
+ifeq ($(CONFIG_ALTIVEC),y)
+altivec_flags := -maltivec $(call cc-option,-mabi=altivec)
+# Enable <altivec.h>
+altivec_flags += -isystem $(shell $(CC) -print-file-name=include)
+
+ifdef CONFIG_CC_IS_CLANG
+# clang ppc port does not yet support -maltivec when -msoft-float is
+# enabled. A future release of clang will resolve this
+# https://llvm.org/pr31177
+CFLAGS_REMOVE_powerpc/altivec1.o  += -msoft-float
+CFLAGS_REMOVE_powerpc/altivec2.o  += -msoft-float
+CFLAGS_REMOVE_powerpc/altivec4.o  += -msoft-float
+CFLAGS_REMOVE_powerpc/altivec8.o  += -msoft-float
+CFLAGS_REMOVE_vpermxor1.o += -msoft-float
+CFLAGS_REMOVE_vpermxor2.o += -msoft-float
+CFLAGS_REMOVE_vpermxor4.o += -msoft-float
+CFLAGS_REMOVE_vpermxor8.o += -msoft-float
+endif
+endif
+
+quiet_cmd_unroll = UNROLL  $@
+      cmd_unroll = $(AWK) -v N=$* -f $(src)/unroll.awk < $< > $@
+
+targets += int1.c int2.c int4.c int8.c
+$(obj)/int%.c: $(src)/int.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_arm/neon1.o += $(CC_FLAGS_FPU)
+CFLAGS_arm/neon2.o += $(CC_FLAGS_FPU)
+CFLAGS_arm/neon4.o += $(CC_FLAGS_FPU)
+CFLAGS_arm/neon8.o += $(CC_FLAGS_FPU)
+CFLAGS_arm/recov_neon_inner.o += $(CC_FLAGS_FPU)
+CFLAGS_REMOVE_arm/neon1.o += $(CC_FLAGS_NO_FPU)
+CFLAGS_REMOVE_arm/neon2.o += $(CC_FLAGS_NO_FPU)
+CFLAGS_REMOVE_arm/neon4.o += $(CC_FLAGS_NO_FPU)
+CFLAGS_REMOVE_arm/neon8.o += $(CC_FLAGS_NO_FPU)
+CFLAGS_REMOVE_arm/recov_neon_inner.o += $(CC_FLAGS_NO_FPU)
+targets += arm/neon1.c arm/neon2.c arm/neon4.c arm/neon8.c
+$(obj)/arm/neon%.c: $(src)/arm/neon.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_powerpc/altivec1.o += $(altivec_flags)
+CFLAGS_powerpc/altivec2.o += $(altivec_flags)
+CFLAGS_powerpc/altivec4.o += $(altivec_flags)
+CFLAGS_powerpc/altivec8.o += $(altivec_flags)
+targets += powerpc/altivec1.c \
+	   powerpc/altivec2.c \
+	   powerpc/altivec4.c \
+	   powerpc/altivec8.c
+$(obj)/powerpc/altivec%.c: $(src)/powerpc/altivec.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+CFLAGS_powerpc/vpermxor1.o += $(altivec_flags)
+CFLAGS_powerpc/vpermxor2.o += $(altivec_flags)
+CFLAGS_powerpc/vpermxor4.o += $(altivec_flags)
+CFLAGS_powerpc/vpermxor8.o += $(altivec_flags)
+targets += powerpc/vpermxor1.c \
+	   powerpc/vpermxor2.c \
+	   powerpc/vpermxor4.c \
+	   powerpc/vpermxor8.c
+$(obj)/powerpc/vpermxor%.c: $(src)/powerpc/vpermxor.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+targets += s390/s390vx8.c
+$(obj)/s390/s390vx%.c: $(src)/s390/s390vx.uc $(src)/unroll.awk FORCE
+	$(call if_changed,unroll)
+
+quiet_cmd_mktable = TABLE   $@
+      cmd_mktable = $(obj)/mktables > $@
+
+targets += tables.c
+$(obj)/tables.c: $(obj)/mktables FORCE
+	$(call if_changed,mktable)

@@ -24,8 +24,6 @@
 
 #include <linux/raid/pq.h>
 
-#ifdef CONFIG_ALTIVEC
-
 #include <altivec.h>
 #include <asm/cputable.h>
 #include <asm/switch_to.h>

@@ -122,5 +120,3 @@ const struct raid6_calls raid6_altivec$# = {
 	"altivecx$#",
 	0
 };
-
-#endif /* CONFIG_ALTIVEC */

@@ -21,8 +21,6 @@
  */
 
 #include <linux/raid/pq.h>
-#ifdef CONFIG_ALTIVEC
-
 #include <altivec.h>
 #include <asm/ppc-opcode.h>
 #include <asm/cputable.h>

@@ -95,4 +93,3 @@ const struct raid6_calls raid6_vpermxor$# = {
 	"vpermxor$#",
 	0
 };
-#endif

@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_RAID6_PQ_KUNIT_TEST)	+= raid6_kunit.o

@@ -11,8 +11,6 @@
  * MMX implementation of RAID-6 syndrome functions
  */
 
-#ifdef CONFIG_X86_32
-
 #include <linux/raid/pq.h>
 #include <asm/fpu/api.h>
 

@@ -135,5 +133,3 @@ const struct raid6_calls raid6_mmxx2 = {
 	"mmxx2",
 	0
 };
-
-#endif

@@ -16,8 +16,6 @@
  * worthwhile as a separate implementation.
  */
 
-#ifdef CONFIG_X86_32
-
 #include <linux/raid/pq.h>
 #include <asm/fpu/api.h>
 

@@ -155,5 +153,3 @@ const struct raid6_calls raid6_sse1x2 = {
 	"sse1x2",
 	1			/* Has cache hints */
 };
-
-#endif

@@ -1,83 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_RAID6_PQ)	+= raid6_pq.o test/
-
-raid6_pq-y	+= algos.o recov.o tables.o int1.o int2.o int4.o \
-		   int8.o
-
-raid6_pq-$(CONFIG_X86) += recov_ssse3.o recov_avx2.o mmx.o sse1.o sse2.o avx2.o avx512.o recov_avx512.o
-raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \
-                              vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o
-raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
-raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
-raid6_pq-$(CONFIG_LOONGARCH) += loongarch_simd.o recov_loongarch_simd.o
-raid6_pq-$(CONFIG_RISCV_ISA_V) += rvv.o recov_rvv.o
-
-hostprogs	+= mktables
-
-ifeq ($(CONFIG_ALTIVEC),y)
-altivec_flags := -maltivec $(call cc-option,-mabi=altivec)
-# Enable <altivec.h>
-altivec_flags += -isystem $(shell $(CC) -print-file-name=include)
-
-ifdef CONFIG_CC_IS_CLANG
-# clang ppc port does not yet support -maltivec when -msoft-float is
-# enabled. A future release of clang will resolve this
-# https://llvm.org/pr31177
-CFLAGS_REMOVE_altivec1.o  += -msoft-float
-CFLAGS_REMOVE_altivec2.o  += -msoft-float
-CFLAGS_REMOVE_altivec4.o  += -msoft-float
-CFLAGS_REMOVE_altivec8.o  += -msoft-float
-CFLAGS_REMOVE_vpermxor1.o += -msoft-float
-CFLAGS_REMOVE_vpermxor2.o += -msoft-float
-CFLAGS_REMOVE_vpermxor4.o += -msoft-float
-CFLAGS_REMOVE_vpermxor8.o += -msoft-float
-endif
-endif
-
-quiet_cmd_unroll = UNROLL  $@
-      cmd_unroll = $(AWK) -v N=$* -f $(src)/unroll.awk < $< > $@
-
-targets += int1.c int2.c int4.c int8.c
-$(obj)/int%.c: $(src)/int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_altivec1.o += $(altivec_flags)
-CFLAGS_altivec2.o += $(altivec_flags)
-CFLAGS_altivec4.o += $(altivec_flags)
-CFLAGS_altivec8.o += $(altivec_flags)
-targets += altivec1.c altivec2.c altivec4.c altivec8.c
-$(obj)/altivec%.c: $(src)/altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_vpermxor1.o += $(altivec_flags)
-CFLAGS_vpermxor2.o += $(altivec_flags)
-CFLAGS_vpermxor4.o += $(altivec_flags)
-CFLAGS_vpermxor8.o += $(altivec_flags)
-targets += vpermxor1.c vpermxor2.c vpermxor4.c vpermxor8.c
-$(obj)/vpermxor%.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_neon1.o += $(CC_FLAGS_FPU)
-CFLAGS_neon2.o += $(CC_FLAGS_FPU)
-CFLAGS_neon4.o += $(CC_FLAGS_FPU)
-CFLAGS_neon8.o += $(CC_FLAGS_FPU)
-CFLAGS_recov_neon_inner.o += $(CC_FLAGS_FPU)
-CFLAGS_REMOVE_neon1.o += $(CC_FLAGS_NO_FPU)
-CFLAGS_REMOVE_neon2.o += $(CC_FLAGS_NO_FPU)
-CFLAGS_REMOVE_neon4.o += $(CC_FLAGS_NO_FPU)
-CFLAGS_REMOVE_neon8.o += $(CC_FLAGS_NO_FPU)
-CFLAGS_REMOVE_recov_neon_inner.o += $(CC_FLAGS_NO_FPU)
-targets += neon1.c neon2.c neon4.c neon8.c
-$(obj)/neon%.c: $(src)/neon.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += s390vx8.c
-$(obj)/s390vx%.c: $(src)/s390vx.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-quiet_cmd_mktable = TABLE   $@
-      cmd_mktable = $(obj)/mktables > $@
-
-targets += tables.c
-$(obj)/tables.c: $(obj)/mktables FORCE
-	$(call if_changed,mktable)

@@ -1,3 +0,0 @@
-/int.uc
-/neon.uc
-/raid6test

@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_RAID6_PQ_KUNIT_TEST)	+= test.o