[PATCH v2 1/3] md: Don't clear MD_CLOSING when the raid is about to stop
From: <hidden>
Date: 2024-01-17 09:40:43
Also in:
lkml
Subsystem:
software raid (multiple disks) support, the rest · Maintainers:
Song Liu, Yu Kuai, Linus Torvalds
From: Li Nan <redacted>
The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.
Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <redacted>
---
drivers/md/md.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9bdd57324c37..4bf821b89415 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c@@ -6254,7 +6254,15 @@ static void md_clean(struct mddev *mddev) mddev->persistent = 0; mddev->level = LEVEL_NONE; mddev->clevel[0] = 0; - mddev->flags = 0; + /* + * Don't clear MD_CLOSING, or mddev can be opened again. + * 'hold_active != 0' means mddev is still in the creation + * process and will be used later. + */ + if (mddev->hold_active) + mddev->flags = 0; + else + mddev->flags &= BIT_ULL_MASK(MD_CLOSING); mddev->sb_flags = 0; mddev->ro = MD_RDWR; mddev->metadata_type[0] = 0;
@@ -7728,6 +7736,12 @@ static int md_ioctl(struct block_device *bdev, blk_mode_t mode, case STOP_ARRAY: err = do_md_stop(mddev, 0, bdev); + if (!err) + /* + * mddev has been stopped, keep flag the + * MD_CLOSING to prevent reuse. + */ + did_set_md_closing = false; goto unlock; case STOP_ARRAY_RO:
--
2.39.2