Re: [PATCH v5 3/3] md/raid1: keep the barrier held until handle_read_error() finished
From: Yu Kuai <hidden>
Date: 2023-08-14 12:39:10
在 2023/08/14 16:51, Xueshi Hu 写道:
handle_read_error() will call allow_barrier() to match the former barrier
raising. However, it should put the allow_barrier() at the end to avoid an
concurrent raid reshape.
Fixes: 689389a06ce7 ("md/raid1: simplify handle_read_error().")LGTM Reviewed-by: Yu Kuai <redacted>
quoted hunk ↗ jump to hunk
Signed-off-by: Xueshi Hu <redacted> --- drivers/md/raid1.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 5f17f30a00a9..5a5eb5f1a224 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c@@ -2499,6 +2499,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) struct mddev *mddev = conf->mddev; struct bio *bio; struct md_rdev *rdev; + sector_t sector; clear_bit(R1BIO_ReadError, &r1_bio->state); /* we got a read error. Maybe the drive is bad. Maybe just@@ -2528,12 +2529,13 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) } rdev_dec_pending(rdev, conf->mddev); - allow_barrier(conf, r1_bio->sector); + sector = r1_bio->sector; bio = r1_bio->master_bio; /* Reuse the old r1_bio so that the IO_BLOCKED settings are preserved */ r1_bio->state = 0; raid1_read_request(mddev, bio, r1_bio->sectors, r1_bio); + allow_barrier(conf, sector); } static void raid1d(struct md_thread *thread)