Re: raid10 redundancy

Adam Goryachev writes:

Jumping into this one late, but I thought the main risk was related to 
the fact that for every read there is a chance the device will fail to 
read the data successfully, and so the more data you need to read in 
order to restore redundancy, the greater the risk of not being able to 
regain redundancy.

Also the assumption that the drives tend to fail after about the same
number of reads, and since all of the drives in the array have had about
the same number of reads, by the time you get the first failure, a
second likely is not far behind.

Both of these assumptions are about as flawed as the mistaken belief
that many have that based on the bit error rates published by drive
manufacturers, that if you read the entire multi TB drive, odds are
quite good that you will get an uncorrectable error.  I've tried it
many times and it doesn't work that way.