On Tue, Mar 10, 2020 at 02:20:02PM -0700, Song Liu wrote:

On Sun, Mar 8, 2020 at 7:15 AM Chris Green [off-list ref] wrote:

quoted

Well I've got it working again but I'm very confused as to *why* it
failed the way it did.

A 'cat /proc/mdstat' produced:-

    Personalities : [linear] [raid0] [raid1]
    md4 : active raid1 sda4[0]
          973522816 blocks [2/1] [U_]

    md1 : active raid1 sdb2[0] sda2[1]
          256960 blocks [2/2] [UU]

    md3 : active raid1 sdb3[0] sda3[1]
          987904 blocks [2/2] [UU]

    md2 : active raid1 sdb4[0]
          973522816 blocks [2/1] [U_]

    md0 : active raid1 sdb1[0] sda1[1]
          1959808 blocks [2/2] [UU]

So md2 and md4 (the main parts of the two 1Tb disk drives) seemed to
be OK from the RAID point of view.  But I noticed that the block
device for /dev/md4 didn't exist:-

    ~ # ls -l /dev/md*
    brw-r-----    1 root     root       9,   0 Sep 29  2011 /dev/md0
    brw-r-----    1 root     root       9,   1 Sep 29  2011 /dev/md1
    brw-r-----    1 root     root       9,  10 Sep 29  2011 /dev/md10
    brw-r-----    1 root     root       9,  11 Sep 29  2011 /dev/md11
    brw-r-----    1 root     root       9,  12 Sep 29  2011 /dev/md12
    brw-r-----    1 root     root       9,  13 Sep 29  2011 /dev/md13
    brw-r-----    1 root     root       9,  14 Sep 29  2011 /dev/md14
    brw-r-----    1 root     root       9,  15 Sep 29  2011 /dev/md15
    brw-r-----    1 root     root       9,  16 Sep 29  2011 /dev/md16
    brw-r-----    1 root     root       9,  17 Sep 29  2011 /dev/md17
    brw-r-----    1 root     root       9,  18 Sep 29  2011 /dev/md18
    brw-r-----    1 root     root       9,  19 Sep 29  2011 /dev/md19
    brw-r-----    1 root     root       9,   2 Sep 29  2011 /dev/md2
    brw-r-----    1 root     root       9,  20 Sep 29  2011 /dev/md20
    brw-r-----    1 root     root       9,  21 Sep 29  2011 /dev/md21
    brw-r-----    1 root     root       9,  22 Sep 29  2011 /dev/md22
    brw-r-----    1 root     root       9,  23 Sep 29  2011 /dev/md23
    brw-r-----    1 root     root       9,  24 Sep 29  2011 /dev/md24
    brw-r-----    1 root     root       9,  25 Sep 29  2011 /dev/md25
    brw-r-----    1 root     root       9,  26 Sep 29  2011 /dev/md26
    brw-r-----    1 root     root       9,  27 Sep 29  2011 /dev/md27
    brw-r-----    1 root     root       9,  28 Sep 29  2011 /dev/md28
    brw-r-----    1 root     root       9,  29 Sep 29  2011 /dev/md29
    brw-r-----    1 root     root       9,   3 Sep 29  2011 /dev/md3
    brw-r-----    1 root     root       9,   5 Sep 29  2011 /dev/md5
    brw-r-----    1 root     root       9,   6 Sep 29  2011 /dev/md6
    brw-r-----    1 root     root       9,   7 Sep 29  2011 /dev/md7
    brw-r-----    1 root     root       9,   8 Sep 29  2011 /dev/md8
    brw-r-----    1 root     root       9,   9 Sep 29  2011 /dev/md9


The fix was simply to use 'mknod' to create the missing /dev/md4, now
I can mount the drive and see the data.

What I don't understand is where /dev/md4 went, how would it have got
deleted?  I have yet to reboot the system to see if /dev/md4
disappears again but if it does it's not a big problem to create it
again.

Should the RAID block devices get created as part of the RAID start
up? Maybe there's something gone awry there.

Do you have proper /etc/md.conf?

There is no /etc/md.conf or anything that I can see related to RAID
configuration anywhere in the system.

-- 
Chris Green