any progress or more information needed on this?

On Mon, Apr 20, 2015 at 10:39 PM, David F. [off-list ref] wrote:

If you need access to the system, a network kvm is available - or if
you have a C600 based system, you should see the same problem there.

On Fri, Apr 10, 2015 at 1:07 PM, David F. [off-list ref] wrote:

quoted

Okay, and to confirm, this is happening on other C600 based systems.
Boot to Linux with MDADM raid support and the raid is gone after
reboot.

On Thu, Apr 9, 2015 at 5:50 PM, NeilBrown [off-list ref] wrote:

quoted

On Thu, 9 Apr 2015 14:13:05 -0700 "David F." [off-list ref] wrote:

quoted

Hello,

I built a new system, installed new drives (no partitioning, just raw
new drives), configured RAID 1, boot to linux, created reports
attached.  Rebooted and the system doesn't see any configured raid
drives (just the two raw drives).

Thanks.  I might take a look, but I would greatly prefer it if you kept the
linux-raid list on the Cc.....

NeilBrown