Maybe he has raw drives that were in this NAS and is trying to match
the layout to recover something? I know that's probably not going to
work, certainly without a lot of other things going right, but its the
first thing that came to mind, given his reasoning and how he stated
it.

On Aug 30, 2013 3:36 PM, "Stan Hoeppner" [off-list ref] wrote:

On 8/30/2013 2:32 PM, Veedar Hokstadt wrote:

quoted

Hello,
I would like to use mdadm to set up a raid0 with a 512B chunk size.

I ask as my purpose is to mimic a raid0 config from a Lacie NAS box
that uses a 512B chunk size.

Your reasoning is flawed.  Why would you want to imitate a configuration
that is inherently flawed?

quoted

The lowest chunk value mdadm will accpet is 4. Anything less and mdadm
gives an error "invalid chunk/rounding value"

For good reason.

quoted

Is there any way to create a raid0 with a 512B chunk?

First, if you're using RAID0 it absolutely must be assumed that you
desire maximum speed, care nothing for redundancy, and you don't care if
you lose your data when a disk fails because you have a full backup of
the RAID0 filesystem.

If you want speed, using RAID0 with a 512 byte chunk isn't going to
achieve it.  On the contrary, using such a small chunk will drop a
hammer on your throughput because you're processing a much larger number
of IOs per quantity of data transferred.  This is extremely inefficient,
and throughput drops.  With RAID0 you typically want a very large chunk,
the largest your drives can ingest efficiently in a single IO.  I'll
make an educated assumption that you plan to store media files on this
array, probably DVDs/CDs, and/or use it as a DVR.  In this case you want
a large chunk, 512KB-1MB.

However, you've stated you want to duplicate a NAS device.  Consider
that GbE using Rtl 81xx devices tops out at ~70-90 MBs application level
throughput.  Two modern drives in RAID0 with a proper chunk size can
read/write at double that rate.  Given this fact, why are you bothering
with RAID0?  You won't see any of the increased performance RAID0 can
give you.  In fact a single modern drive can saturate GbE.

I assume you are using RAID0 simply as an inexpensive way to maximize
your storage capacity.  That's fine with backups or if you have the
original media.  If you don't, or don't want to go through the hassle of
recreating your RAID0 after a disk failure and replacement, and copying
all your files back to it, I suggest you use RAID1/5/6/10 instead.

--
Stan



--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html