quoted

5) for x in /sys/block/sd*/device/timeout ; do echo $x $(< $x) ;
done
                 http://pastie.org/8040870

All timeouts are still the default 30 seconds. With enabled ERC
support, these values must be two to three minutes. I recommend 180
seconds. Your array *will not* complete a rebuild with dealing with
this problem.

With ERC suppot, those timeouts should be around 7 seconds, not 3 minutes. What he pasted was 180 seconds, as in three minutes, which will bust a RAID rather quickly.

Vennlige hilsener / Best regards

roy
--
Roy Sigurd Karlsbakk
(+47) 98013356
roy@karlsbakk.net
http://blogg.karlsbakk.net/
GPG Public key: http://karlsbakk.net/roysigurdkarlsbakk.pubkey.txt
--
I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med xenotyp etymologi. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html