Thread (2 messages) 2 messages, 2 authors, 2012-12-26
  • (off-list ancestor, not in this archive)
  • Re: · Phil Turmel <hidden> · 2012-12-26
  • Re: · bobzer <hidden> · 2012-12-26

Re:

flat view

From: Phil Turmel <hidden>
Date: 2012-12-26 02:15:35

On 12/25/2012 07:16 PM, bobzer wrote:
thanks to help me
No problem, but please *don't* top-post, and *do* trim replies.  Also,
use reply-to-all on kernel.org mailing lists.
root@debian:~# mdadm -E /dev/sd[bcd]1
/dev/sdb1:
          Magic : a92b4efc
        Version : 1.2
    Feature Map : 0x0
     Array UUID : bf3c605b:9699aa55:d45119a2:7ba58d56
           Name : debian:0  (local to host debian)
  Creation Time : Sun Mar  4 22:49:14 2012
     Raid Level : raid5
   Raid Devices : 3

 Avail Dev Size : 3907021954 (1863.01 GiB 2000.40 GB)
     Array Size : 7814043136 (3726.03 GiB 4000.79 GB)
  Used Dev Size : 3907021568 (1863.01 GiB 2000.40 GB)
    Data Offset : 2048 sectors
   Super Offset : 8 sectors
          State : clean
    Device UUID : 5e71f69a:a78b0cd7:bbbb7ecb:cf81f9f6

    Update Time : Tue Dec 25 06:25:02 2012
  Bad Block Log : 512 entries available at offset 2032 sectors
       Checksum : 922ddaa8 - correct
         Events : 413

         Layout : left-symmetric
     Chunk Size : 128K

   Device Role : Active device 0
   Array State : A.. ('A' == active, '.' == missing)
mdadm: No md superblock detected on /dev/sdc1.
mdadm: No md superblock detected on /dev/sdd1.
This is bad.  The two disks are still offline.  You must find and fix
the hardware problem that is keeping these two disks from communicating.
 Unless the two disks suffered a simultaneous power surge, the odds they
are OK is good.  But look at your cables, controller, or power supply.
I would like to understand too
dmesg (with the begin removed) show a lot of error :
http://pastebin.com/D1D8AKF9
I browsed it: all attempts to communicate with those two drives failed.
 That must be fixed first.  Then we can help you recover the data.  If
you can plug the three drives into another machine, that would be the
simplest way to isolate the problem.

HTH,

Phil
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help