On 07/27/2012 09:45 PM, Grant Coady wrote:

On Fri, 27 Jul 2012 14:45:18 -0700, you wrote:

quoted

On 07/27/2012 12:08 PM, Bill Davidsen wrote:

quoted

Have you set the io scheduler to deadline on all members of the array?
That's kind of "job one" on older kernels.

I have not, thanks for the tip, I'll look into that now.

Plus I disable the on-drive queuing (NCQ) during startup, right now
I don't have benchmarks to show the difference.  This on a six by 1TB
drive RAID6 array I built over a year ago on Slackware64-13.37:

# cat /etc/rc.d/rc.local
...
# turn off NCQ on the RAID drives by adjusting queue depth to 1
n=1
echo "rc.local: Disable RAID drives' NCQ"
for d in a b c d e f
do
         echo "  set NCQ depth to $n on sd${d}"
         echo $n>  /sys/block/sd${d}/device/queue_depth
done
...

Maybe you could try that?  See if it makes a difference.  My drives
are Seagate.

Grant.

Does disabling NCQ improve performance?

The suggestion to use kernel 3.4.6 has been working quite well so far, 
hopefully that fixes the problem.  I'll know for sure in a few more days...

Thanks!
-- Kevin