All spares in Raid 5, default chunk? version of mdadm significant?

Started by Anshuman Aggarwal on Jun 22, 2012

open the first message on its own page

Message details and related content
Hi,
 I have a 6 device raid 5 array which had 1 disk go bad and then due to a
power outage, the machine shutdown and when it started all the disks were
showing up as spares with the following mdadm -E output (sample for one
given below and full for all devices attached).

This md device was part a Physical Volume for a LVM Volume Group.

I am trying to recreate the array using mdadm --create --assume-clean using
1 device as missing. I am checking if the device is getting created
correctly by checking the UUID of the created device which would match if
the device gets created correctly.

I have tried a few combinations of the disk order that I believe is right
however I think I'm getting tripped up by the fact that the mdadm I used to
create this md device was some 2.x series and now we are on 3.x (and I may
have taken some of the defaults originally which I don't' remember)
What all 'defaults' have changed over the versions so I can try those? Like
chunk size? Can we manually configure the super/data offset? Are those
significant when we do an mdadm --create --assume-clean?

Thanks,
Anshu

/dev/sda5:
          Magic : a92b4efc
        Version : 1.2
    Feature Map : 0x0
     Array UUID : b480fe0c:c9e29256:0fcf1b0c:1f8c762c
           Name : GATEWAY:RAID5_500G
  Creation Time : Wed Apr 28 16:10:43 2010
     Raid Level : -unknown-
   Raid Devices : 0

 Avail Dev Size : 976768002 (465.76 GiB 500.11 GB)
  Used Dev Size : 976765954 (465.76 GiB 500.10 GB)
    Data Offset : 2048 sectors
   Super Offset : 8 sectors
          State : active
    Device UUID : a8499a91:628ddde8:1cc8f4b9:749136f9

    Update Time : Sat May 19 23:04:23 2012
       Checksum : 9950883c - correct
         Events : 1


   Device Role : spare
   Array State :  ('A' == active, '.' == missing)
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help