On Tue, 15 May 2012, Dan Williams wrote:
On Mon, May 14, 2012 at 5:04 PM, Mark Hills [off-list ref] wrote:
quoted
On Fri, 11 May 2012, Dan Williams wrote:
quoted
This is a hybrid proposal for supporting bcache as a md device.
Somewhat similar to the v1.x metadata format, where array assembly is
handled in userspace, but managed in the kernel. In the bcache case it
is an "external" metadata format, but then the expectation is that the
kernel "bcache" personality takes over runtime maintenance of the
metadata.
I am having some trouble with this, can you clarify (perhaps by example)
how to create a pairing of a cache and backing device?
[...]
quoted
# make-bcache -C /dev/sdb
# make-bcache -B /dev/sdc
# mdadm -A /dev/md0 /dev/sdb /dev/sdc
mdadm: Cannot assemble mbr metadata on /dev/sdb
I should have been more explicit in the changelog. This current patch
was only tested to assemble an existing bcache configuration. I.e. it
assumes the backing device has been attached to the cache set at least
once. By default make-bcache always creates a new cache-set id per
invocation. So in the above example it won't find sdb and sdc belong
to the same md device because the cache-set id's differ. You can
verify this with mdadm -E.
Thanks for explaining. I suppose this is just expecially awkward at the
moment because attaching the devices can't be done without a different
kernel.
So it will be good to see the "create" support, when it is ready.
[..]
quoted
Maybe I missed something basic here, but I'm afraid can't see what? If
not, hopefully this information is useful.
I use bcache v13 patches and the MD conversion, and this patch to mdadm.
For reference:
[root@fedora-virt ~]# mdadm -E /dev/vd[bc]
/dev/vdb:
Magic : <bcache>
Version : 3
Role : cache
Set UUID : e8670bc3:974b489c:aeb68ea1:d1adf6d1
Cache Devs : 1
Device UUID : a1b25e26:5a4c4db6:2716c1aa:eba44ec7
Flags : sync
Policy : lru
Label :
Device Size : 16776192 (8.00 GiB 8.59 GB)
Bucket Size : 1024
Num Buckets : 16384
this dev : 0
First Bucket : 1
Checksum : 45fa97cda53b0b6 correct
/dev/vdc:
Magic : <bcache>
Version : 1
Role : backing-device
Set UUID : e8670bc3:974b489c:aeb68ea1:d1adf6d1
Cache Devs : 1
Device UUID : 7045ff87:aa4b13c4:670d8bb2:0b4ad628
Flags : sync
State : clean
Mode : writeback
Label :
Device Size : 16776192 (8.00 GiB 8.59 GB)
Bucket Size : 1024
Num Buckets : 16384
this dev : 0
First Bucket : 1
Checksum : f36910e51451d91c correct
Presumably there's a little more too this, as I can't even investigate the
UIDs in use:
# make-bcache -C /dev/sdb
[...]
# make-bcache -B /dev/sdc
[...]
# mdadm -E /dev/sd[bc]
/dev/sdb:
MBR Magic : aa55
/dev/sdc:
MBR Magic : aa55
I confirmed that I'm using the patched mdadm, but it still doesn't seem to
recognise the magic.
But, of course, I understand this is all work in progress. So this isn't a
complaint at all, I am just looking forward to code in this area and happy
to test where I can.
Thanks
--
Mark