M majianpeng #
Message details and related content
From 759a61519343c64066a5a14bb97447878aa1297e Mon Sep 17 00:00:00 2001
From: majianpeng <redacted>
Date: Mon, 19 Mar 2012 15:59:04 +0800
Subject: [PATCH] md/raid5:Fix recover/replace stop and start repreatedly if
handle stipe failed,because one disk had bad blocks.
When raid5 recovering,then failed because one disk had bad blocks.
The sync_request() return value which larger than 0 and set
MD_RECOVERY_INTR.Because the statement if (test_bit(MD_RECOVERY_INTR,
&mddev->recovery)) first call,so the mddev->curr_resync did not change.
After the sync done,the mddev->curr_resync did not change.So the
resync_thread will stop and start repeatedly.
Signed-off-by: majianpeng <redacted>
---
drivers/md/md.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ce88755..370c9d9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c@@ -7261,11 +7261,12 @@ void md_do_sync(struct mddev *mddev) atomic_add(sectors, &mddev->recovery_active); } - if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) - break; j += sectors; if (j>1) mddev->curr_resync = j; + + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + break; mddev->curr_mark_cnt = io_sectors; if (last_check == 0) /* this is the earliest that rebuild will be
--
1.7.5.4
--------------
majianpeng
2012-03-20