On 24 October 2011 17:03, Michael Busby [off-list ref] wrote:

should the speed be very slow when doing this progress, its a lot
slower than a normal grow

reshape =  1.2% (25006080/1953513984) finish=12481.8min speed=2574K/sec

On 24 October 2011 15:11, Mathias Burén [off-list ref] wrote:

quoted

On 24 October 2011 14:11, Michael Busby [off-list ref] wrote:

quoted

At the moment i have a raid5 setup with 5 disks, i am looking to add a
6th disk and change from raid 5 to raid 6

having looked at Neil's site i have found the following command, and
just want to double check this is still the recommend way of
converting

mdadm --grow /dev/md0 --level=6 --raid-disks=6 --backup-file=/home/md.backup

also would i need to add the extra disk before or after the command?

cheers
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Hi,

I grew my 6 disk RAID5 to a 7 disk RAID6. First, add the drive. Then
partition it as required. Then add the drive to the array (I think
it'll become a spare?). Then you can grow it.

Make sure you're using the latest mdadm tools available.

Regards,
Mathias

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

(please reply to the bottom of the email)

What CPU are you using? What are the min/max kbps settings on the md
device? What does top (or htop) show you?

/M
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html