Re: Data-check brings system to a standstill
From: Tim Small <hidden>
Date: 2010-06-18 17:10:24
On 16/06/10 17:52, Bill Davidsen wrote:
quoted
As of kernel 2.6.32 (I didn't see this when I was running 2.6.24-2.6.27 previously), the kernel also emits "hung task" warnings every few minutes while the data-check is in progress: # echo check > /sys/block/md1/md/sync_action # cat /var/log/messages
Have things switched to AHCI (or similar SATA controller) with NCQ since? If so, do you drives have buggy firmware which makes them suck with sequential reads when NCQ is enabled? See the libata wiki for details - you can try disabling NCQ (or limiting queue depth to 2, or whatever) to test it.... Tim. -- South East Open Source Solutions Limited Registered in England and Wales with company number 06134732. Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ VAT number: 900 6633 53 http://seoss.co.uk/ +44-(0)1273-808309