Re: Why does one get mismatches?

Started by Goswin von Brederlow on Jan 28, 2010 · 3 messages from 3 authors · Last reply Feb 1, 2010

open the first message on its own page

Message details and related content
"Tirumala Reddy Marri" [off-list ref] writes:
I just tried and miss-match count is zero. Interesting, is XOR engine
doing something wrong ? . Then I ran a test where I raw-write the file
to /dev/md0. Then did the raw-read for the same size. In this case XOR
matched as expected. Then I failed a drive using "mdadm -f /dev/md0
/dev/sda". Then I read the same size data again from /dev/md0. And
checksum matches too. 
What is this mean XOR engine is doing right thing. But "chec/repair"
test is not functioning properly with XOR-engine ?

Or is this something to do with  how the buffers are handled ? may they
are cached ?


-Marri
No idea. But if everything works without the XOR engine and gives
mismatches with then I would think there is a software or hardware error
there and not in the cable or disks.

MfG
        Goswin
Message details and related content
--- On Thu, 28/1/10, Goswin von Brederlow <goswin-v-b@web.de> wrote:
From: Goswin von Brederlow <redacted>
Subject: Re: Why does one get mismatches?
To: <redacted>
Date: Thursday, 28 January, 2010, 20:24
"Tirumala Reddy Marri" [off-list ref]
writes:
quoted
I just tried and miss-match count is zero.
Interesting, is XOR engine
quoted
doing something wrong ? . Then I ran a test where I
raw-write the file
quoted
to /dev/md0. Then did the raw-read for the same size.
In this case XOR
quoted
matched as expected. Then I failed a drive using
"mdadm -f /dev/md0
quoted
/dev/sda". Then I read the same size data again from
/dev/md0. And
quoted
checksum matches too. 
What is this mean XOR engine is doing right thing. But
"chec/repair"
quoted
test is not functioning properly with XOR-engine ?

Or is this something to do with  how the buffers
are handled ? may they
quoted
are cached ?


-Marri
No idea. But if everything works without the XOR engine and
gives
mismatches with then I would think there is a software or
hardware error
there and not in the cable or disks.

MfG
        Goswin
--
To unsubscribe from this list: send the line "unsubscribe
linux-raid" in

3 more quoted lines

i think my RAM is fecked - does that sound like a possible cause? memtest86 gives PAGES of red errors when run but the POST gives nothing and the machine boots.... it has 512MB

i have some more on order as a speculative.. 


      
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Message details and related content
Jon Hardcastle wrote:
quoted hunk
--- On Thu, 28/1/10, Goswin von Brederlow <goswin-v-b@web.de> wrote:

  
quoted
From: Goswin von Brederlow <redacted>
Subject: Re: Why does one get mismatches?
To: <redacted>
Date: Thursday, 28 January, 2010, 20:24
"Tirumala Reddy Marri" [off-list ref]
writes:

    
quoted
I just tried and miss-match count is zero.
      
Interesting, is XOR engine
    
quoted
doing something wrong ? . Then I ran a test where I
      
raw-write the file
    
quoted
to /dev/md0. Then did the raw-read for the same size.
      
In this case XOR
    
quoted
matched as expected. Then I failed a drive using
      
"mdadm -f /dev/md0
    
quoted
/dev/sda". Then I read the same size data again from
      
/dev/md0. And
    
quoted
checksum matches too. What is this mean XOR engine is doing right thing. But
      
"chec/repair"
    
quoted
test is not functioning properly with XOR-engine ?

Or is this something to do with  how the buffers
      
are handled ? may they

26 more quoted lines

I would bet that your RAM is broken. Any errors indicate bad RAM, no errors indicate no persistent error. Scrap that RAM. More will make the machine faster, too.

-- 
Bill Davidsen [off-list ref]
 "We can't solve today's problems by using the same thinking we
  used in creating them." - Einstein
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help