Re: Raid 5 - not clean and then a failure.

From
Goswin von Brederlow <hidden>
Date
2009-08-26 20:34:30
Jon Hardcastle [off-list ref] writes:
quoted hunk
--- On Wed, 26/8/09, Goswin von Brederlow <goswin-v-b@web.de> wrote:
quoted
From: Goswin von Brederlow <redacted>
Subject: Re: Raid 5 - not clean and then a failure.
To: <redacted>
Cc: <redacted>
Date: Wednesday, 26 August, 2009, 12:18 PM
Jon Hardcastle [off-list ref]
writes:
quoted
Guys,

I have been having some problems with my arrays that I
think i have nailed down to a pci controller (well I say
that - it is always the drives connected to *a* controller
but I have tried 2!) anyway the latest saga is i was trying
some new kernel options last night - which didn't work.
quoted
But when i booted up again this morning it said one of
the drives was in an inconsistent state (not sure of the
*exact* error message). I then kicked off an add of the
drive and it started syncing. It got about 5% in and then
the second drive in on that controller complained and the
array failed. 
quoted
Is there any hope for my data? If i get a good
controller in there will the resync continue? can I try and
tell it to assume the drives are good (which they ought to
be)?
quoted
Please help!
The inconsistency is probably just a block here or there
and I'm
assuming none of your drives actualy failed. So 99.9999% of
your data
should be there. Just rebooting might actualy just get your
raid back
(to syncing). If not then you have to force reassembly from
the drives
with the newest serials. That will give you some data
corruption,
whatever was writing when the controler gave errors. Worst
case you
have to recreate the raid with --assume-clean.

I recommend adding a bitmap to the raid. That way a
wrongfully failed
drive can be resynced in a matter of minutes instead of
hours or
days. Makes it way less likely another error occurs during
resync.

MfG
        Goswin
--
To unsubscribe from this list: send the line "unsubscribe
linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
I did look into bitmaps *abit* i could easily have the imagine for my 6 drive raid 5 stored on the raid1 I have in the same system.. The googling I did tho did not paint a pretty picture it talked about huge performance hits?
That depends on the bitmap size a lot.

It also depends on the frequency of errors. If your controler has a
hickup once a week causing a drive to fail and you need 1 day to
rebuild the array you will be left with a double disk failure pretty
quickly without bitmaps.

MfG
        Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thread (1 message) 1 message, 1 author, last reply 2009-08-26
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help