"Guy Watkins" [off-list ref] writes:
} -----Original Message-----
} From: linux-raid-owner@vger.kernel.org [mailto:linux-raid-
} owner@vger.kernel.org] On Behalf Of Goswin von Brederlow
} Sent: Wednesday, August 12, 2009 10:09 PM
} To: Billy Crook
} Cc: Henry, Andrew; goswin-v-b@web.de; Drew; linux-raid@vger.kernel.org
} Subject: Re: raid-0 with mdadm vs lvm striping
}
} Billy Crook [off-list ref] writes:
}
} > On Wed, Aug 12, 2009 at 04:14, Henry, Andrew[off-list ref]
} wrote:
} >> That's what my question was: Will raid0 (striping) be faster or easier
} to manage than lvm striping
} >
} > LVM striping won't change performance for small files. (That is files,
} > smaller than the extent size.) To be fair, RAID-0 striping won't
} > accelerate file access for files smaller than the stripe size either.
} > However, traditionally, raid0 stripe sizes are much much smaller than
} > LVM extent sizes. Both are however adjustable.
}
} That sucks. LVM striping really should have a setting where it stripes
} chunks within a PE.
}
} MfG
} Goswin
Why not use this option?
Ignorance. :) I never use raid0 so I never needed to look for all the
stripe parameters.
-I, --stripesize StripeSize
Gives the number of kilobytes for the granularity of the
stripes. StripeSize must be 2^n (n = 2 to 9) for metadata in LVM1 format.
For metadata in LVM2 format, the stripe size may be a larger power of 2
but must not exceed the physical extent size.
I have never use lvcreate with Linux, but have with HP-UX. Looks about the
same, but maybe I am confused.
Guy
MfG
Goswin
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html