Re: partitioned raid 5 and proper partition alignment

Started by Goswin von Brederlow on Aug 8, 2009

open the first message on its own page

Message details and related content
Matthias Dahl [off-list ref] writes:
Hi.

On Saturday 08 August 2009 09:56:59 you wrote:
quoted
But each stripe only holds 128k of data. You have to align to that.
I beg to differ. There are two data chunks and one parity chunk, thus a whole 
stripe is 192k long if you've a 64k chunk size. If you align to 128k and you 
put e.g. ext4 on it with the correct fs stride and stripe-width settings, 
you'll probably end up with worse performance since you start in the middle of 
a stripe even though properly aligned to a chunk boundary. Or am I totally on 
the wrong track here...?!
Yes you are. The filesystem will never ever see the parity block of a
stripe. It only ever sees the 128k data. Writing 128k data will write
a full stripe of 192k to disk.

MfG
        Goswin
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help