Re: Draft Mirrored Linux Mini How-to

"NeilBrown" [off-list ref] writes:

On Sat, August 8, 2009 11:11 am, Goswin von Brederlow wrote:

quoted

Tapani Tarvainen [off-list ref] writes:

quoted

On Thu, Aug 06, 2009 at 08:08:47PM -0400, Harold Pritchett
(harold@uga.edu) wrote:

quoted

Mirrored Linux Mini How-to

A few quick observations:

quoted

Install linux on two identical disk drives in such a way that the
failure
of either of the drives will allow the system to be recovered without
any
loss of data

Both of the drives are partitioned exactly the same:
     1.  3 primary partitions
     2.  Partition 1 - size - 1GB format as Linux Raid (fd)
     3.  Partition 2 - size = real memory size, format as linux swap
(82)
     4.  Partition 3 = size = remainder of disk, format as linux raid
(fd)

If I read correctly, you are not only leaving swap out of lvm,
you are not mirroring it at all - which would make the system
crash if the swap disk breaks.
Putting swap on lvm would also allow growing it easily as needed.

On the other hand don't forget that raid1 is buggy with swap and the
page contents might change between writes to the first and second
disk. Or has that been fixed?

There is no bug here.  The behaviour is a little unexpected
but it is perfectly "correct" in that there is never any risk to
data.

NeilBrown

Disk 1 writes, page is modified, disk 2 writes, page is swapped in
from disk 1, something crashes because old data is swapped in.

Or did I miss something?

MfG
        Goswin