Re: Raid 5 Recovery

From
Erik Boettcher <hidden>
Date
2009-03-22 09:05:47
Reply to
Max Amanshauser, 2009-03-22
On Sun, Mar 22, 2009 at 3:15 AM, Max Amanshauser
[off-list ref] wrote:
On Mar 22, 2009, at 4:15 AM, Erik Boettcher wrote:
quoted
Indeed recreating seems like my only option now.  I'd like to ensure
the right creation order, so I'd like to ask for some help.  Attached
is the output of 'mdadm -Evvvv /dev/sd{a,b,c,d,e}3'  Any help
restoring this array is greatly appreciated!
<mdadmEout>


I had the same problem recently and solved it relatively pain-free.


Basically what I did was:

*) Find out where the old superblocks are located and backup them with dd,
just in case. Ideally you should backup all of the disks entirely (if they
have errors, use dd_rescue and do the following on healthy disks).
Hmm, I can't back up the disks but I'm trying to get the superblocks.
I can't find where they're located to copy them!
*) Recreate with mdadm and the same options that were used when creating the
raid in the first place, with one device declared missing.
"mdadm --create /dev/md0 -e 0.90 -c 32 -p left-asymmetric -l 5 -n 5
/dev/sdc3 /dev/sdd3 /dev/sde3 /dev/sdb3 missing" sounds about right in your
case. I'd find out what the difference between 0.88 and 0.90 superblocks is,
though. If you have devices with errors you should declare the most broken
one missing, of course. And make absolutely sure that the options are
correct or you will overwrite innocent data. The device order is not so
important, since you can change it in subsequent recreate attempts without
breaking anything.
Is the order that mdadm --query provides more correct? I guess I'll find out....
*) Try to read-only mount the array, and/or use dumpe2fs (if you have
ext2/3). If it works, hurray. If not, recreate again with a different device
order. Ultimately you will probably have to e2fsck to correct the damage.
LLVM is being used here, so I'll have to make sure vgscan etc don't write...

I got the correct device order on the second attempt and lost only 150kB due
to hard disk errors. Guess I was lucky.

--
Good luck,
Thanks, I need it.
Max.
Erik
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thread (5 messages) 5 messages, 3 authors, last reply 2009-03-22
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help