On Mon, Feb 9, 2009 at 1:30 PM, Bill Davidsen [off-list ref] wrote:
Jon Nelson wrote:
quoted
I don't think so. This is how I *remove* the nbd device:
mdadm /dev/md11 --fail /dev/nbd0
sleep 3
mdadm /dev/md11 --remove /dev/nbd0
and then finally nbd-client -d /dev/nbd0
If necessary, I can try to simulate the problem by using a local
logical volume or some such.
I would try this with just the first step. I looked at the code briefly, and
I think the write intent bitmap will not get built for a removed device but
will for failed. In any case it's certainly something you can easily try.
Nope. :-( --remove is necessary.
turnip:~ # mdadm --fail /dev/md11 /dev/nbd0
mdadm: set /dev/nbd0 faulty in /dev/md11
turnip:~ # mdadm --re-add /dev/md11 /dev/nbd0
mdadm: Cannot open /dev/nbd0: Device or resource busy
turnip:~ # mdadm --add /dev/md11 /dev/nbd0
mdadm: Cannot open /dev/nbd0: Device or resource busy
turnip:~ #
--
Jon