Whoops, I didn't mean to send that previous half formed mail :) Sorry.

On Thu, Feb 19, 2009 at 08:38:38AM -0500, Justin Piszcz wrote:

I was curious if anyone had done any benchmarks and/or has conclusive 
information, what is the best Linux scheduler to use with SSDs?

Noop?
CFQ?
AS?
Deadline?

As mentioned in another mail there was a discussion on
http://lkml.org/lkml/2009/1/31/28 and long thread talking about the
introduction of the rotational flag here
http://lkml.org/lkml/2009/1/5/340 . Cheapo SSDs or even USB keys are not
auto detected as non-rotational devices by the kernel and after a bit of
poking about I've come up with the following udev rules for my
particular cases:

SUBSYSTEM=="block", TEST=="/sys$devpath/queue/rotational", ATTRS{model}=="ASUS-PHISON *", RUN+="/bin/sh -c 'echo 0 > /sys$devpath/queue/rotational'"
SUBSYSTEM=="block", TEST=="/sys$devpath/queue/rotational", ATTRS{idVendor}=="0951", ATTRS{idProduct}=="1606", RUN+="/bin/sh -c 'echo 0 > /sys$devpath/queue/rotational'"
SUBSYSTEM=="block", TEST=="/sys$devpath/queue/rotational", ATTRS{manufacturer}=="SanDisk", ATTRS{product}=="Cruzer Micro", RUN+="/bin/sh -c 'echo 0 > /sys$devpath/queue/rotational'"

Ever since the rotational option appeared I've been trying cfq but prior
to that I was using noop or deadline. However it doesn't look like
anyone has sat down and run the numbers to see what affect the
ioscheulder/rotational flag is having on cheapo SSDs - all the
suggestions are anecdotal. Could you run some benchmarks with these
different options and report back the results?

-- 
Sitsofe | http://sucs.org/~sits/