Tor Arne Vestbø wrote:
Neil Brown wrote:
quoted
If a partition start at an offset in the device which is a multiple of
64K, and ends at the end of the device, then both the partition and
the whole device will appear to have the same superblock. This can
cause confusion.
I think you are on to something here! I did partition all my disks with
just one partition, starting on the first block and taking up all the
remaining space, and set it to type Linux RAID auto detect.
[snip]
So is this a case of the problem you described about
superblock-confusion? If so, is it fixable?
It appears it is :)
For googlability, here's what I did:
Changed the DEVICE line in my mdadm.conf from:
DEVICE partitions
to
DEVICE /dev/sd[bcdef]1
Now the array is assembled correctly at boot.
I'm still confused why the device nodes went missing as a result of the
failed assembly earlier, but that's a minor issue I can live with :)
Tor Arne
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html