(Sorry for the late reply)
On 12 Jan 2009, Michal Soltys wrote:
Mika Tiainen wrote:
quoted
Hi,
When booting from another disk I can see that the md0 partitions are
only found later:
md0: p1 p2
This line shows up after root is already mounted.
I've never used in-kernel raid autodetection (always relying on
initramfs - any reason not to use one ?),
Initrd is what I'm using now and it works, but I'd rather get by without
initrd as I have no other need for it.
but looking at md.txt from kernel docs, raid=partitionable parameter
should get it done. You might end with md_d0 (as in earlier kernels)
name instead of md0, so adjust root=, fstab, etc. accordingly.
raid=partitionable is what I used before, but it doesn't work with these
new style partitions. The raid gets detected as md_d0, but no md_d0p1.
If this can't be fixed and these new partitionable arrays can't be used
as root without initrd it should be documented somewhere.
--
Mika Tiainen Always be wary of any helpful item that
mikat@iki.fi weighs less than its operating manual.
http://mikat.iki.fi -- (Terry Pratchett, Jingo)