[v2] md: asynchronous handle_parity_check6

Started by Yuri Tikhonov on Jan 13, 2009

Subsystems (2)

Maintainers (3)

DORMANTno replies

open the first message on its own page

Message details and related content
This patch introduces the state machine for handling the RAID-6 parities
check and repair functionality.

Signed-off-by: Yuri Tikhonov <redacted>
Signed-off-by: Ilya Yanok <redacted>
---
 drivers/md/raid5.c |  164 +++++++++++++++++++++++++++++++++++-----------------
 1 files changed, 111 insertions(+), 53 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 2e26e84..b8e37c8 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2620,91 +2620,149 @@ static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
 				struct r6_state *r6s, struct page *tmp_page,
 				int disks)
 {
-	int update_p = 0, update_q = 0;
-	struct r5dev *dev;
+	int i;
+	struct r5dev *devs[2] = {NULL, NULL};
 	int pd_idx = sh->pd_idx;
 	int qd_idx = r6s->qd_idx;
 
 	set_bit(STRIPE_HANDLE, &sh->state);
 
 	BUG_ON(s->failed > 2);
-	BUG_ON(s->uptodate < disks);
+
 	/* Want to check and possibly repair P and Q.
 	 * However there could be one 'failed' device, in which
 	 * case we can only check one of them, possibly using the
 	 * other to generate missing data
 	 */
 
-	/* If !tmp_page, we cannot do the calculations,
-	 * but as we have set STRIPE_HANDLE, we will soon be called
-	 * by stripe_handle with a tmp_page - just wait until then.
-	 */
-	if (tmp_page) {
+	switch (sh->check_state) {
+	case check_state_idle:
+		/* start a new check operation if there are < 2 failures */
 		if (s->failed == r6s->q_failed) {
 			/* The only possible failed device holds 'Q', so it
 			 * makes sense to check P (If anything else were failed,
 			 * we would have used P to recreate it).
 			 */
-			compute_block_1(sh, pd_idx, 1);
-			if (!page_is_zero(sh->dev[pd_idx].page)) {
-				compute_block_1(sh, pd_idx, 0);
-				update_p = 1;
-			}
+			sh->check_state = check_state_run;
+			set_bit(STRIPE_OP_CHECK_PP, &s->ops_request);
+			clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+			s->uptodate--;
 		}
 		if (!r6s->q_failed && s->failed < 2) {
 			/* q is not failed, and we didn't use it to generate
 			 * anything, so it makes sense to check it
 			 */
-			memcpy(page_address(tmp_page),
-			       page_address(sh->dev[qd_idx].page),
-			       STRIPE_SIZE);
-			compute_parity6(sh, UPDATE_PARITY);
-			if (memcmp(page_address(tmp_page),
-				   page_address(sh->dev[qd_idx].page),
-				   STRIPE_SIZE) != 0) {
-				clear_bit(STRIPE_INSYNC, &sh->state);
-				update_q = 1;
-			}
+			sh->check_state = check_state_run;
+			set_bit(STRIPE_OP_CHECK_QP, &s->ops_request);
+			clear_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
+			s->uptodate--;
 		}
-		if (update_p || update_q) {
-			conf->mddev->resync_mismatches += STRIPE_SECTORS;
-			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
-				/* don't try to repair!! */
-				update_p = update_q = 0;
+		if (sh->check_state == check_state_run) {
+			break;
 		}
 
-		/* now write out any block on a failed drive,
-		 * or P or Q if they need it
-		 */
+		/* we have 2-disk failure */
+		BUG_ON(s->failed != 2);
+		devs[0] = &sh->dev[r6s->failed_num[0]];
+		devs[1] = &sh->dev[r6s->failed_num[1]];
+		/* fall through */
+	case check_state_compute_result:
+		sh->check_state = check_state_idle;
 
-		if (s->failed == 2) {
-			dev = &sh->dev[r6s->failed_num[1]];
-			s->locked++;
-			set_bit(R5_LOCKED, &dev->flags);
-			set_bit(R5_Wantwrite, &dev->flags);
+		BUG_ON((devs[0] && !devs[1]) ||
+		       (!devs[0] && devs[1]));
+
+		BUG_ON(s->uptodate < (disks - 1));
+
+		if (!devs[0]) {
+			if (s->failed >= 1)
+				devs[0] = &sh->dev[r6s->failed_num[0]];
+			else
+				devs[0] = &sh->dev[pd_idx];
 		}
-		if (s->failed >= 1) {
-			dev = &sh->dev[r6s->failed_num[0]];
-			s->locked++;
-			set_bit(R5_LOCKED, &dev->flags);
-			set_bit(R5_Wantwrite, &dev->flags);
+		if (!devs[1]) {
+			if (s->failed >= 2)
+				devs[1] = &sh->dev[r6s->failed_num[1]];
+			else
+				devs[1] = &sh->dev[qd_idx];
 		}
 
-		if (update_p) {
-			dev = &sh->dev[pd_idx];
-			s->locked++;
-			set_bit(R5_LOCKED, &dev->flags);
-			set_bit(R5_Wantwrite, &dev->flags);
-		}
-		if (update_q) {
-			dev = &sh->dev[qd_idx];
-			s->locked++;
-			set_bit(R5_LOCKED, &dev->flags);
-			set_bit(R5_Wantwrite, &dev->flags);
+		BUG_ON(!test_bit(R5_UPTODATE, &devs[0]->flags) &&
+		       !test_bit(R5_UPTODATE, &devs[1]->flags));
+
+		/* check that a write has not made the stripe insync */
+		if (test_bit(STRIPE_INSYNC, &sh->state))
+			break;
+
+		for (i=0; i < 2; i++) {
+			if (test_bit(R5_UPTODATE, &devs[i]->flags)) {
+				s->locked++;
+				set_bit(R5_LOCKED, &devs[i]->flags);
+				set_bit(R5_Wantwrite, &devs[i]->flags);
+			}
 		}
-		clear_bit(STRIPE_DEGRADED, &sh->state);
 
+		clear_bit(STRIPE_DEGRADED, &sh->state);
 		set_bit(STRIPE_INSYNC, &sh->state);
+		break;
+	case check_state_run:
+		break; /* we will be called again upon completion */
+	case check_state_check_result:
+		sh->check_state = check_state_idle;
+
+		/* if a failure occurred during the check operation, leave
+		 * STRIPE_INSYNC not set and let the stripe be handled again
+		 */
+		if (s->failed > 1) {
+			break;
+		}
+
+		/* handle a successful check operation, if parity is correct
+		 * we are done.  Otherwise update the mismatch count and repair
+		 * parity if !MD_RECOVERY_CHECK
+		 */
+		if (sh->ops.zero_sum_result == 0) {
+			/* both parities are correct */
+			if (!s->failed) {
+				set_bit(STRIPE_INSYNC, &sh->state);
+			} else {
+				sh->check_state = check_state_compute_result;
+			}
+		} else {
+			conf->mddev->resync_mismatches += STRIPE_SECTORS;
+			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+				/* don't try to repair!! */
+				set_bit(STRIPE_INSYNC, &sh->state);
+			else {
+				sh->check_state = check_state_compute_run;
+				set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+				set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+				if (sh->ops.zero_sum_result &
+				    DMA_PCHECK_FAILED) {
+					set_bit(R5_Wantcompute,
+						&sh->dev[pd_idx].flags);
+					sh->ops.target = pd_idx;
+					s->uptodate++;
+				} else
+					sh->ops.target = -1;
+				if (sh->ops.zero_sum_result &
+				    DMA_QCHECK_FAILED) {
+					set_bit(R5_Wantcompute,
+						&sh->dev[qd_idx].flags);
+					sh->ops.target2 = qd_idx;
+					s->uptodate++;
+				} else
+					sh->ops.target2 = -1;
+			}
+		}
+		break;
+	case check_state_compute_run:
+		break;
+	default:
+		printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+		       __func__, sh->check_state,
+		       (unsigned long long) sh->sector);
+		BUG();
 	}
 }
 
-- 
1.6.0.6
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help