Re: Recovering RAID-5 from images

Started by Steve Fairbairn on Nov 10, 2008

open the first message on its own page

Message details and related content
Stefan Heinrichsen wrote:
Hello,

I have a RAID-5 with 3 devices. One disked failed and I added a new one. During sync a second disc failed. This second "Disc" is a RAID-0 consisting of to 120GB IDE Discs. I handled to dump an image of both disc with ddrescue. Only a few kilobytes of the broken disk could not been read (some where in the middle of the disc).
For my recovering experiments I made an Image of the remaining disc of the RAID-5 (/dev/loop3). No I tried to assemble the both RAIDs using loopbackdevice. The RAID-0 (/dev/md0) started without any problems. But the RAID-5 is not starting. It seems like both discs are marked as spare (see below).
I'm no md/mdadm expert, but I suspect you first need to stop the
/dev/md0 and restart it as /dev/md1 (I hope you can do that).  The
reason I would do this is that the examines of the array elements you
sent us show that what you have now as /dev/md0 was /dev/md1.

Then you need to force the assembly of the array with just the 2
'working' discs (/dev/loop3 && /dev/md1)

eg. (PLEASE check these with someone else before using them)...

mdadm --stop /dev/d0
mdadm --assemble /dev/md1 <component devices)
mdadm --assemble /dev/<dev> /dev/loop3 /dev/md1 --force

The --force will tell it to ignore that fact that /dev/md1 was marked as
failed and insert it anyway.

Hope this helps,

Steve.

PS.  Sorry for repeat send.  I forgot to include the list address.
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help