On Wed, 2008-07-02 at 15:02 -0700, H. Peter Anvin wrote:
Neil Brown wrote:
quoted
On Wednesday June 11, rabbit+list@rabbit.us wrote:
quoted
Hello,
The subject pretty much says it all - it obviously is not 0xFD, since there is
nothing to autodetect. Is there some best practice/semi-standard way of
marking a raid component partition as such? After reading the specs 0xDA
(non-fs data) comes to mind, but I figured I'll ask here.
I (almost) alway make arrays out of whole devices, not partitions, so
I really never thought about this.
I suspect 0xDA is safest and hence best.
I wonder if this should be suggested in the mdadm man page
anywhere.... anyone feel like creating a patch?
Why 0xDA?
As far as I know, the closest thing there is to a registry is the list
that aeb at least used to maintain.
Actually, if you are going to use version 1 superblocks anyway, then
just list the partitions as normal linux partitions. The whole
linux-raid-autodetect partition type was originally only for auto detect
at bootup. If you weren't using that feature, then standard linux type
was good enough. And if you use version 1.1 or 1.2 superblocks, then
you really don't have anything to worry about since the location of the
superblock and the data start offset means that the partition won't get
accidentally recognized as a non-raid partition.
--
Doug Ledford [off-list ref]
GPG KeyID: CFBFF194
http://people.redhat.com/dledford
Infiniband specific RPMs available at
http://people.redhat.com/dledford/Infiniband