NeilBrown wrote:
On Sun, June 15, 2008 7:27 pm, Jelle de Jong wrote:
quoted
This message contains the following attachment(s):
debug-mdadm.txt
setup-mdadm.txt
Dear Neil,
Thank you for creating mdadm. I am creating my first raid1 array and got
some very confusing issues.
My raid1 md0 array should consist out of disks:
/dev/sda1
/dev/sdb1
These are 749GB ext3 partitions in mirroring mode.
However when I reboot my system, mdadm tells me everything is fine and
is correctly using sda1 and sdb1.
But it is not using a 749GB partition, it is using the same partition
size as my /dev/sdc1? and when I write a test file to the root dir and
then mount /dev/sdc1 the file is there also. So md0 is directly
connected with /dev/sdc1. It does not make any sens to me.
Can you please look at my debug en setup file that i created and maybe
see something that is going wrong?
It is fairly clear that you are still booting off /dev/sdc1 and that is
being mounted as the root filesystem.
You probably need to run "mkinitramfs" or something like that to create
a new ramfs which mounts /dev/md0 instead of /dev/sdc.
If you don't know how to do that, trying asking on
linux-raid@vger.kernel.org
NeilBrown
Thank you for your eye opener :-D
I totally overlooked the grub menu file. I know have a working system, I removed the /dev/sdc1 and now running on raid array only :-D
Thank for your support.
PS. I attached my complete configuration routine as attachment, if you see something wrong/dangerous/advice please notify me.
Kind regards,
Jelle de Jong