Re: RAID1 over aoe devices freezes cp-procs on failure of one aoe device

Hallo Gabor,

Gabor Gombas [off-list ref] schrieb:

On Thu, Jun 05, 2008 at 04:25:02PM +0200, Lars Täuber wrote:

quoted

The lost aoe-device is correctly marked as faulty but the the raid is
not usable for a copying processes any more although the remaining
device should be enough for a RAID1. There was no change after
removing the faulty device from md9.

Is it possible that one faulty aoe-device blocks the aoe-module anyhow
so that all other aoe devices aren't accessible anymore? Or is the
RAID subsystem responsible for this?

It should be easy to test: when the RAID hangs, try to read directly
from the remaining device ("dd if=/dev/etherd/e11.1 ..."). If that also
hangs, then it is an AoE issue.

the easiest tests are the last that come to mind. :o)
There is another problem here:
The described problem is not reproducable. I'm not sure wether I made something wrong or the situation is not the same after the shutdown.

I'm checking this right now.

Thanks
Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html