On Thursday March 20, hubskml@free.fr wrote:
Hi list
Each time I create a RAID5 array, by default, as a degraded array with a
spare, I cannot stop and restart the array unless the initial resync has
completed. If I do so, the resync is not resumed when the array is
re-assembled.
Is this due to the fact that one disk is a spare, but md actually
doesn't know which of the disks is the spare one ?
No. It is due to that fact that the v0.90 metadata has no convenient
place to record how far the recovery has progressed.
If you use --metadata=1 when creating the array, it will be able to
record the status of incomplete recovery and restart is properly.
NeilBrown
Assuming that there is no bug and no workaround about this issue, I
think the following: when one cannot guarantee the array won't be
stopped until the resync completes, one should better create the RAID5
array with the -f option. Indeed, when I use -f, I can stop the array
and restart it, the resync will be resumed where it had stopped.
The cost of this is that the initial resync runs slower.
Comments are welcome.
Thanks,
Hubert
PS: the reshape patch from Neil on 03/03/08 does not fix the issue.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html