On Thu, Feb 07, 2008 at 09:05:04AM +0100, Luca Berra wrote:
On Wed, Feb 06, 2008 at 04:45:39PM +0100, Keld Jørn Simonsen wrote:
quoted
On Wed, Feb 06, 2008 at 10:05:58AM +0100, Luca Berra wrote:
quoted
On Sat, Feb 02, 2008 at 08:41:31PM +0100, Keld Jørn Simonsen wrote:
quoted
Make each of the disks bootable by lilo:
lilo -b /dev/sda /etc/lilo.conf1
lilo -b /dev/sdb /etc/lilo.conf2
There should be no need for that.
to achieve the above effect with lilo you use
raid-extra-boot=mbr-only
in lilo.conf
quoted
Make each of the disks bootable by grub
install grub with the command
grub-install /dev/md0
I have already changed the text on the wiki. Still I am not convinced it
is the best advice that is described.
lilo -b /dev/md0 (without a raid-extra-boot line in lilo.conf) will
install lilo on the boot sector of the partitions containing /dev/md0
(and it will break with 1.1 sb)
I think 1.1 Superblocks will break all boots with lilo and grub,
but 1.1 superblocks are not standard in current distributions.
When would 1.1 superblocks be a problem, for new users of raid?
for grub, do you have any doubt about the grub-install script not
working correctly?
No, I think the grub description is OK. I only meant the lilo
description.
Best regards
keld
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html