Goswin von Brederlow said:     (by the date of Wed, 07 Nov 2007 10:17:51 +0100)

Strange. That is exactly how I always do it and it always just worked.
mdadm should start syncing on any spare as soon as a disk fails or you
add the spare to a degraded array afaik. No special "start now"
interaction needed.

Thanks for your confirmation. I cannot explain this behaviour - I
just started using mdadm. If anybody here wants, I can remove the
drive and add this again, to see if I can duplicate this "bug" (?).
If so - then tell me what debug information you do need and I will
give it to you.

Anyway, it seems that this command 

  mdadm --assemble --update=resync /dev/md1 /dev/hda3 /dev/sda3 /dev/hdc3

worked, becasue `mdadm -D /dev/md1` says that array is in
"State : active" (not degraded).

best regards
-- 
Janek Kozicki                                                         |