Re: stride / stripe alignment on LVM ?

From
Goswin von Brederlow <hidden>
Date
2007-11-07 09:04:13
Neil Brown [off-list ref] writes:
On Thursday November 1, janek_listy@wp.pl wrote:
quoted
Hello,

I have raid5 /dev/md1, --chunk=128 --metadata=1.1. On it I have
created LVM volume called 'raid5', and finally a logical volume
'backup'.

Then I formatted it with command:

   mkfs.ext3 -b 4096 -E stride=32 -E resize=550292480 /dev/raid5/backup

And because LVM is putting its own metadata on /dev/md1, the ext3
partition is shifted by some (unknown for me) amount of bytes from
the beginning of /dev/md1.

I was wondering, how big is the shift, and would it hurt the
performance/safety if the `ext3 stride=32` didn't align perfectly
with the physical stripes on HDD?
It is probably better to ask this question on an ext3 list as people
there might know exactly what 'stride' does.

I *think* it causes the inode tables to be offset in different
block-groups so that they are not all on the same drive.  If that is
the case, then an offset causes by LVM isn't going to make any
difference at all.

NeilBrown
Afaik that is true and I never found any significant speed difference
in ext3 no matter what stripe size I select. The natural speed
fluctuations of e.g. bonnie seem to be bigger than the difference the
stripe size option makes.

But then again I test for large files so inode operations are not that
common. You probably have to test creating lots of dirs and small
files and file deletion to see any effect.

MfG
        Goswin
Thread (1 message) 1 message, 1 author, last reply 2007-11-07
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help