Re: How to determine drive order in RAID-1

Started by Neil Brown on Oct 16, 2007

open the first message on its own page

Message details and related content
On Monday October 15, laytonjb@charter.net wrote:
Good evening,

I hate to be a noob, but my system is dying (I think it's a bad
motherboard) so I wanted to get this email out before the system
died again.

I've got 2 different RAID-1 devices (md0 and md1). md0 uses
the on-board IDE controller and md1 has two SATA drives
each is attached to a Promise SATA300 TX2 controller
(one drive to one controller). Is there anyway to determine
which drive is the first drive in the md device and which is
the second.
There is no "first" or "second".  There are just two drives.
The reason I want to determine this is that I will be moving
the drives to a new system. Or does it matter in which order
they are moved? (the OS drive is moving over as well).
No, it does not matter.

NeilBrown
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help