On 3/31/07, Bill Davidsen [off-list ref] wrote:
Raz Ben-Jehuda(caro) wrote:
quoted
Please see bellow.
On 8/28/06, Neil Brown [off-list ref] wrote:
quoted
On Sunday August 13, raziebe@gmail.com wrote:
quoted
well ... me again
Following your advice....
I added a deadline for every WRITE stripe head when it is created.
in raid5_activate_delayed i checked if deadline is expired and if
not i am
quoted
setting the sh to prereadactive mode as .
This small fix ( and in few other places in the code) reduced the
amount of reads
to zero with dd but with no improvement to throghput. But with
random access to
quoted
the raid ( buffers are aligned by the stripe width and with the size
of stripe width )
there is an improvement of at least 20 % .
Problem is that a user must know what he is doing else there would be
a reduction
in performance if deadline line it too long (say 100 ms).
So if I understand you correctly, you are delaying write requests to
partial stripes slightly (your 'deadline') and this is sometimes
giving you a 20% improvement ?
I'm not surprised that you could get some improvement. 20% is quite
surprising. It would be worth following through with this to make
that improvement generally available.
As you say, picking a time in milliseconds is very error prone. We
really need to come up with something more natural.
I had hopped that the 'unplug' infrastructure would provide the right
thing, but apparently not. Maybe unplug is just being called too
often.
I'll see if I can duplicate this myself and find out what is really
going on.
Thanks for the report.
NeilBrown
Neil Hello. I am sorry for this interval , I was assigned abruptly to
a different project.
1.
I'd taken a look at the raid5 delay patch I have written a while
ago. I ported it to 2.6.17 and tested it. it makes sounds of working
and when used correctly it eliminates the reads penalty.
2. Benchmarks .
configuration:
I am testing a raid5 x 3 disks with 1MB chunk size. IOs are
synchronous and non-buffered(o_direct) , 2 MB in size and always
aligned to the beginning of a stripe. kernel is 2.6.17. The
stripe_delay was set to 10ms.
Attached is the simple_write code.
command :
simple_write /dev/md1 2048 0 1000
simple_write raw writes (O_DIRECT) sequentially
starting from offset zero 2048 kilobytes 1000 times.
Benchmark Before patch
sda 1848.00 8384.00 50992.00 8384 50992
sdb 1995.00 12424.00 51008.00 12424 51008
sdc 1698.00 8160.00 51000.00 8160 51000
sdd 0.00 0.00 0.00 0 0
md0 0.00 0.00 0.00 0 0
md1 450.00 0.00 102400.00 0 102400
Benchmark After patch
sda 389.11 0.00 128530.69 0 129816
sdb 381.19 0.00 129354.46 0 130648
sdc 383.17 0.00 128530.69 0 129816
sdd 0.00 0.00 0.00 0 0
md0 0.00 0.00 0.00 0 0
md1 1140.59 0.00 259548.51 0 262144
As one can see , no additional reads were done. One can actually
calculate the raid's utilization: n-1/n * ( single disk throughput
with 1M writes ) .
3. The patch code.
Kernel tested above was 2.6.17. The patch is of 2.6.20.2
because I have noticed a big code differences between 17 to 20.x .
This patch was not tested on 2.6.20.2 but it is essentialy the same. I
have not tested (yet) degraded mode or any other non-common pathes.
My weekend is pretty taken, but I hope to try putting this patch against
2.6.21-rc6-git1 (or whatever is current Monday), to see not only how it
works against the test program, but also under some actual load. By eye,
my data should be safe, but I think I'll test on a well backed machine
anyway ;-)
Bill.
This test program WRITES data to a raw device, it will
destroy everything you have on the RAID.
If you want to use a file system test unit, as mentioned
I have one for XFS file system.
--
bill davidsen [off-list ref]
CTO TMR Associates, Inc
Doing interesting things with small computers since 1979
--
Raz